BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277883BTC
Διαθέσιμο
Simmtec, Inc
Simmtec, Inc 16GB Kit (2x8GB) DDR3 1333 CL9 1.5V 240-pin Desktop RAM
A 16 GB DDR3 kit running at 1333 MHz with CL9 latency and 1.5 V across two 240-pin modules
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- 16 GB dual-channel kit for smoother multitasking
- DDR3 1333 MHz speed matches PC3-10600 spec
- CL9 latency for responsive system performance
- 5 V standard voltage fits typical desktop slots
- 240-pin UDIMM form factor installs in compatible motherboards
16GB DDR3 1333 Kit for Desktop Upgrades
This Simmtec kit supplies 16GB of DDR3 memory across two 8GB unbuffered DIMMs. It runs at 1333 MT/s with a CAS latency of CL9 and operates at the standard 1.5 V. The modules use the 240-pin form factor common to desktop platforms.
Suits older AMD and Intel systems needing
Builders restoring or extending a legacy desktop that accepts PC3-10600 unbuffered memory will find the dual-rank layout straightforward. Systems limited to a lower maximum capacity per slot, or those requiring ECC or registered modules, cannot use this kit.
Dual-rank 2Rx8 organisation affects slot population
Each 8GB DIMM is organised as 2Rx8, presenting two ranks per module. Some older chipsets restrict the total number of ranks per channel, so verifying the platform’s rank limit before purchase determines whether both sticks can be used together.
Βασικά χαρακτηριστικά
- 16 GB dual-channel kit for smoother multitasking
- DDR3 1333 MHz speed matches PC3-10600 spec
- CL9 latency for responsive system performance
- 5 V standard voltage fits typical desktop slots
- 240-pin UDIMM form factor installs in compatible motherboards
Προδιαγραφές
| Capacity | 16GB (2 x 8GB) |
|---|---|
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
Ερωτήσεις για αυτό το προϊόν
Should I choose the 2x8 GB kit or a single 16 GB module?
The kit provides two 8 GB modules so you can populate two slots for dual-channel operation, while a single 16 GB stick would run in single-channel mode.
Will the 1333 MHz rating actually run at that speed in my desktop?
The modules are rated for DDR3 1333 (PC3-10600) at CL9 1.5 V; the system will set the highest common speed supported by the CPU and motherboard, which may be 1333 or a lower JEDEC step.
Does the 240-pin DDR3 interface limit the bandwidth I can get?
The 240-pin DDR3 interface carries the PC3-10600 data rate, so the peak transfer rate is capped at the 10600 MB/s specification of the modules.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
