暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two blue DDR3 desktop memory modules, 240-pin, 16GB kit

Simmtec, Inc

Simmtec, Inc 16GB Kit (2x8GB) DDR3 1333 CL9 1.5V 240-pin Desktop RAM

SKU CH-RH8K-75XS0

A 16 GB DDR3 kit running at 1333 MHz with CL9 latency and 1.5 V across two 240-pin modules

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • 16 GB dual-channel kit for smoother multitasking
  • DDR3 1333 MHz speed matches PC3-10600 spec
  • CL9 latency for responsive system performance
  • 5 V standard voltage fits typical desktop slots
  • 240-pin UDIMM form factor installs in compatible motherboards

16GB DDR3 1333 Kit for Desktop Upgrades

This Simmtec kit supplies 16GB of DDR3 memory across two 8GB unbuffered DIMMs. It runs at 1333 MT/s with a CAS latency of CL9 and operates at the standard 1.5 V. The modules use the 240-pin form factor common to desktop platforms.

Suits older AMD and Intel systems needing

Builders restoring or extending a legacy desktop that accepts PC3-10600 unbuffered memory will find the dual-rank layout straightforward. Systems limited to a lower maximum capacity per slot, or those requiring ECC or registered modules, cannot use this kit.

Dual-rank 2Rx8 organisation affects slot population

Each 8GB DIMM is organised as 2Rx8, presenting two ranks per module. Some older chipsets restrict the total number of ranks per channel, so verifying the platform’s rank limit before purchase determines whether both sticks can be used together.

特長

  • 16 GB dual-channel kit for smoother multitasking
  • DDR3 1333 MHz speed matches PC3-10600 spec
  • CL9 latency for responsive system performance
  • 5 V standard voltage fits typical desktop slots
  • 240-pin UDIMM form factor installs in compatible motherboards

仕様

Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9

この商品に関する質問

Should I choose the 2x8 GB kit or a single 16 GB module?

The kit provides two 8 GB modules so you can populate two slots for dual-channel operation, while a single 16 GB stick would run in single-channel mode.

Will the 1333 MHz rating actually run at that speed in my desktop?

The modules are rated for DDR3 1333 (PC3-10600) at CL9 1.5 V; the system will set the highest common speed supported by the CPU and motherboard, which may be 1333 or a lower JEDEC step.

Does the 240-pin DDR3 interface limit the bandwidth I can get?

The 240-pin DDR3 interface carries the PC3-10600 data rate, so the peak transfer rate is capped at the 10600 MB/s specification of the modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。