Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black flatbed duplicator with fifteen SATA slots and LCD screen

Systor

Systor 1:15 Flatbed SATA Duplicator & Sanitizer 150MB/s 800W

SKU CH-82Z5-EVSGA

Copies and sanitises up to fifteen 2.5 or 3.5 inch SATA drives at 150 MB/s with DoD 5220.22-M erase, standalone via LCD

  • TypeHard Drive Duplicator
  • Target1 to 15
  • Buffer Memory128 MB
  • Data Transfer Rate150MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen
  • Copy 15 drives at once with 1:15 standalone operation
  • 150 MB/s transfer rate cuts duplication time
  • DoD 5220.22-M sanitisation meets strict erase standards
  • 128 MB buffer keeps data flowing smoothly
  • Dual 400 W supplies deliver reliable 800 W power

Standalone 1-to-15 SATA Duplicator

The Systor flatbed duplicator copies or sanitises up to fifteen SATA drives at once without a host computer. It accepts both 3.5 and 2.5 inch hard disks or solid-state drives directly into its slots, delivering a maximum transfer rate of 150MB/s. An integrated LCD panel and 128MB buffer manage the operation in English, Japanese, Spanish or Portuguese. The unit runs from a dual 400W supply totalling 800W on 115/230V at 50/60Hz.

Verify Drive Compatibility and Power

Confirm that every source and target drive uses a native SATA interface; other interfaces are not supported by this duplicator. Ensure the combined power draw of fifteen drives plus the unit itself stays within the 800W rating of the internal supply. Check that the installation site provides either 115V or 230V at 50Hz or 60Hz to match the auto-ranging input. No software installation or host system is required for operation.

Rack-Mountable Sanitisation Station

The standalone design frees a workstation from cloning duties and eliminates software licensing overhead. Built-in 40mm rear fans and per-port exhaust fans cool all fifteen bays during extended copy or multi-pass erase cycles. DoD 5220.22-M compliant sanitisation meets regulatory wipe requirements without additional tools. The black front panel and slot-load bays fit standard rack environments for high-volume duplication workflows.

Βασικά χαρακτηριστικά

  • Copy 15 drives at once with 1:15 standalone operation
  • 150 MB/s transfer rate cuts duplication time
  • DoD 5220.22-M sanitisation meets strict erase standards
  • 128 MB buffer keeps data flowing smoothly
  • Dual 400 W supplies deliver reliable 800 W power

Προδιαγραφές

BrandSystor
TypeHard Drive Duplicator
Target1 to 15
Buffer Memory128 MB
Data Transfer Rate150MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

Ερωτήσεις για αυτό το προϊόν

What comes in the box with the Systor 1:15 duplicator and do I need any adapters for 2.5 or 3.5 inch drives?

The package contents are shown in the product pictures. The duplicator accepts both 2.5 and 3.5 inch SATA drives directly without requiring separate adapters.

Which copy mode should I choose between Systems and Files or Whole HDD?

Systems and Files copies only the used data area to save time. Whole HDD copies every sector including empty space, which takes longer but creates an exact clone.

What does the 150 MB/s transfer rate mean when the duplicator is running all 15 targets?

The 150 MB/s figure is the maximum copy speed per port. Each of the 15 target bays can operate at up to that rate simultaneously during a duplication job.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.