Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black standalone SATA duplicator with eleven drive slots and LCD screen

Systor

Systor SYS3011DP 1:11 SATA Duplicator & Sanitizer

SKU CH-HYXK-B9CAP

Standalone SATA duplicator copies or sanitises up to eleven 2.5" or 3.5" drives at 18 GB/min with DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 11
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 11

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies 11 drives simultaneously from one source
  • 18 GB per minute transfer speed for fast duplication
  • Standalone operation with LCD screen, no computer needed
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • Supports 2.5 and 3.5 inch SATA drives without adapters

SATA duplicator for 11 targets

The Systor SYS3011DP is a standalone SATA duplicator and sanitizer that clones one source drive to as many as eleven target drives at once. It handles both 3.5 inch and 2.5 inch hard drives or solid-state drives without adapters and reaches a maximum copy speed of 300 MB per second. An integrated LCD screen reports progress and status during operation. No host computer or software is required to run copy or erase jobs.

Suited for high-volume SATA cloning and DoD erasure

This unit suits IT departments, data-recovery labs and duplication services that need to replicate or sanitise many SATA drives in parallel and require DoD 5220.22-M compliant multi-pass erasure. It is not for buyers who need support for interfaces other than SATA, who want a portable battery-powered device, or who require network-attached or software-managed operation.

1-to-11 simultaneous target capacity

The defining specification is the 1-to-11 target ratio: one source drive can be duplicated to eleven targets in a single session. This capacity determines whether the duplicator matches the throughput a workflow demands.

Βασικά χαρακτηριστικά

  • Copies 11 drives simultaneously from one source
  • 18 GB per minute transfer speed for fast duplication
  • Standalone operation with LCD screen, no computer needed
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • Supports 2.5 and 3.5 inch SATA drives without adapters

Προδιαγραφές

BrandSystor
ModelSYS3011DP
TypeHard Drive Duplicator
Target1 to 11
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 400 W
Package Contentssee pictures for details

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How can I verify the duplicator is copying correctly after connecting the source and target drives?

The LCD screen shows real-time progress and completion status for each of the 11 target ports during both copy and erase operations.

What items are included with the SYS3011DP and what must I supply myself?

The unit includes 11 hot-swap SATA bays with individual cooling fans and a 400 W 115/230 V power supply; you provide the 2.5" or 3.5" SATA drives to be duplicated or sanitized.

Which copy mode should I choose between Systems and Files or Whole HDD?

Choose Systems and Files to copy only the used data area for faster duplication, or Whole HDD for a sector-by-sector clone including empty space and hidden partitions.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.