NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
TAURKENAM
Open-frame test bench supports EATX, ATX, Micro-ATX and ITX boards, stacks up to 10 units and fits 310 mm GPUs with internal fans
The TAURKENAM open frame test bench is built for hardware testers and multi-system deployments. Its stackable design allows up to 10 units horizontally for dense workstation or server rack arrangements. It accommodates EATX, ATX, Micro ATX and ITX motherboards up to 330mm square. The open layout simplifies component swaps during validation or benchmarking.
The chassis supports eight 120mm fans for high-volume air cooling or liquid configurations including one 360mm, two 240mm and one 120mm radiator. Unrestricted airflow paths keep component temperatures low during sustained loads. Fan and pump noise remains the only audible output since the frame has no panels to dampen or amplify sound. A standard ATX power supply up to 300mm long fits without restricting intake or exhaust.
The package includes a power button, motherboard spacer wrench and mounting screws so the bench is operational immediately. The spacer wrench speeds up board installation and prevents over-tightening of standoffs. No drive cages or front-panel modules are supplied; the two 3.5-inch and three 2.5-inch bays use the provided screws directly. Builders needing dust filtration, side panels or integrated lighting must source those separately.
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Use the supplied motherboard spacer wrench to install the stand-offs at the 330 mm mounting points, then secure the board with the provided screws; the wrench ensures correct spacer height so the PCB never touches the 1.5 mm SPCC panel.
Periodically wipe the sandblasted SPCC panels and the 0.8 mm base plate to prevent dust build-up, check that the 8 × 120 mm fan mounts remain clear, and retighten any stack bolts if you run the full 10-unit horizontal tower.
The 165 mm CPU-cooler height ceiling forces a low-profile air cooler or forces the 360 mm radiator to compete for the same vertical space, so CPU thermals typically hit the ceiling before GPU clearance does.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;