Open-frame test bench chassis, sandblasted metal frame, stackable design

TAURKENAM

TAURKENAM Open Frame Test Bench PC Case Stackable

SKU CH-SZSH-KA1AR

Open-frame test bench supports EATX, ATX, Micro-ATX and ITX boards, stacks up to 10 units and fits 310 mm GPUs with internal fans

Rigid 1.5 mm SPCC panels and 0.8 mm base plate deliver lasting durability
Stackable up to 10 units horizontally for dense workstation or rack layouts
Fits EATX, ATX, Micro ATX and ITX boards up to 330 × 330 mm
Supports eight 120 mm fans or 360 mm, 240 mm and 120 mm radiators plus 165 mm CPU cooler
Holds graphics cards to 310 mm with internal fans or 335 mm with external mounting alongside 2 HDD and 3 SSD bays

56,99 щ.д.

0.00073123 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни 39,90 щ.д.
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Добавете още 342,01 щ.д. и стандартната доставка става безплатна.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

Open Frame Test Bench for Stackable Builds

The TAURKENAM open frame test bench is built for hardware testers and multi-system deployments. Its stackable design allows up to 10 units horizontally for dense workstation or server rack arrangements. It accommodates EATX, ATX, Micro ATX and ITX motherboards up to 330mm square. The open layout simplifies component swaps during validation or benchmarking.

Thermals Noise and Power in Normal Use

The chassis supports eight 120mm fans for high-volume air cooling or liquid configurations including one 360mm, two 240mm and one 120mm radiator. Unrestricted airflow paths keep component temperatures low during sustained loads. Fan and pump noise remains the only audible output since the frame has no panels to dampen or amplify sound. A standard ATX power supply up to 300mm long fits without restricting intake or exhaust.

Bundled Accessories for Quick Assembly

The package includes a power button, motherboard spacer wrench and mounting screws so the bench is operational immediately. The spacer wrench speeds up board installation and prevents over-tightening of standoffs. No drive cages or front-panel modules are supplied; the two 3.5-inch and three 2.5-inch bays use the provided screws directly. Builders needing dust filtration, side panels or integrated lighting must source those separately.

Акценти

Rigid 1.5 mm SPCC panels and 0.8 mm base plate deliver lasting durability
Stackable up to 10 units horizontally for dense workstation or rack layouts
Fits EATX, ATX, Micro ATX and ITX boards up to 330 × 330 mm
Supports eight 120 mm fans or 360 mm, 240 mm and 120 mm radiators plus 165 mm CPU cooler
Holds graphics cards to 310 mm with internal fans or 335 mm with external mounting alongside 2 HDD and 3 SSD bays

Спецификации

Все още няма публикувани спецификации за този артикул.

Въпроси за този артикул

How do I mount an EATX motherboard on the open frame and which included tool prevents shorting?

Use the supplied motherboard spacer wrench to install the stand-offs at the 330 mm mounting points, then secure the board with the provided screws; the wrench ensures correct spacer height so the PCB never touches the 1.5 mm SPCC panel.

What ongoing maintenance does the stackable test bench require?

Periodically wipe the sandblasted SPCC panels and the 0.8 mm base plate to prevent dust build-up, check that the 8 × 120 mm fan mounts remain clear, and retighten any stack bolts if you run the full 10-unit horizontal tower.

Which thermal limit appears first when running a 335 mm GPU with a 360 mm radiator under sustained load?

The 165 mm CPU-cooler height ceiling forces a low-profile air cooler or forces the 360 mm radiator to compete for the same vertical space, so CPU thermals typically hit the ceiling before GPU clearance does.

Още от този рафт