TYAN
TYAN S2881UG2NR Thunder K8SR Socket 940 AMD-8131 16GB Ultra320 SCSI server motherboard
Dual-socket Opteron 200-series board with AMD-8131 chipset, 16GB DDR memory, Ultra320 SCSI, dual Gigabit Ethernet and ATI RAGE XL graphics
- Dual Gigabit Ethernet for redundant server networking
- AMD-8111/8131 chipset powers dual Opteron 200 series processors
- 16 GB DDR SDRAM capacity handles heavy workloads
- Ultra320 SCSI plus ATA-133 and Serial ATA-150 RAID storage
- ATI RAGE XL graphics provides basic server video output
Tyan Thunder K8SR Socket 940 Server Board
The Tyan S2881UG2NR is a dual-processor server motherboard built for the AMD Opteron 200 series in Socket 940. It uses the AMD-8111 and AMD-8131 chipset combination to support up to 16GB of DDR SDRAM. Integrated ATI RAGE XL graphics provide basic display output for headless or rackmount deployment. Dual Gigabit Ethernet ports handle network connectivity.
Thermals Noise Power
Passive chipset heatsinks and standard CPU cooler mounts manage heat within typical rack airflow. The board draws power through ATX and auxiliary connectors to feed two Opteron processors, memory, and onboard SCSI controllers. Acoustic output depends entirely on the chassis fans and CPU coolers selected by the integrator. No active cooling components are included on the board itself.
Connectors Storage RAID
Four Serial ATA-150 ports support RAID configurations for internal drives. An Ultra320 SCSI interface connects via two 68-pin high-density connectors for external or internal arrays. Two 40-pin IDC headers provide ATA-133 connectivity for legacy devices. The board ships without cables, brackets, or driver media, so installers must source matching interconnects separately.
Βασικά χαρακτηριστικά
- Dual Gigabit Ethernet for redundant server networking
- AMD-8111/8131 chipset powers dual Opteron 200 series processors
- 16 GB DDR SDRAM capacity handles heavy workloads
- Ultra320 SCSI plus ATA-133 and Serial ATA-150 RAID storage
- ATI RAGE XL graphics provides basic server video output
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
How do I install the Opteron 200 series CPU into the Socket 940 without bending pins?
Align the gold triangle on the processor with the matching corner of the Socket 940, lower it straight down without force, then close the retention lever; the step most people miss is verifying the lever locks fully flush before applying thermal paste.
Which components on the S2881UG2NR will need replacement after long-term server duty?
The ATI RAGE XL graphics chip and onboard DDR SDRAM slots are soldered and not serviceable; plan to replace the CMOS battery and any Ultra320 SCSI or ATA-133 drives connected to the 68pin HD and 40pin IDC connectors when they reach end of life.
What is the first limit I will hit running the dual Gigabit Ethernet ports at full throughput?
The AMD-8111 / AMD-8131 chipset and 32-bit PCI bus cap combined network throughput well below the theoretical 2 Gbps, so sustained heavy traffic saturates the bus before the Ethernet controllers do.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Transition Networks ION106-AAB-NA 6 Slot AC Ion Server Chassis Redundant Power Supply
Supermicro SNK-P0048PSC 2U Passive CPU Heatsink LGA2011 Xeon E5-2600
Supermicro MCP-260-00085-0B 1U I/O shield for A1SRM-LN7F/LN5F in SC510 server chassis
- Rear Panel



