Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green server motherboard with dual Socket 940, ATI RAGE XL graphics, two Gigabit Ethernet ports

TYAN

TYAN S2881UG2NR Thunder K8SR Socket 940 AMD-8131 16GB Ultra320 SCSI server motherboard

SKU CH-CG6Z-ZPX8J MPN S2881UG2NR

Dual-socket Opteron 200-series board with AMD-8131 chipset, 16GB DDR memory, Ultra320 SCSI, dual Gigabit Ethernet and ATI RAGE XL graphics

  • Dual Gigabit Ethernet for redundant server networking
  • AMD-8111/8131 chipset powers dual Opteron 200 series processors
  • 16 GB DDR SDRAM capacity handles heavy workloads
  • Ultra320 SCSI plus ATA-133 and Serial ATA-150 RAID storage
  • ATI RAGE XL graphics provides basic server video output

Tyan Thunder K8SR Socket 940 Server Board

The Tyan S2881UG2NR is a dual-processor server motherboard built for the AMD Opteron 200 series in Socket 940. It uses the AMD-8111 and AMD-8131 chipset combination to support up to 16GB of DDR SDRAM. Integrated ATI RAGE XL graphics provide basic display output for headless or rackmount deployment. Dual Gigabit Ethernet ports handle network connectivity.

Thermals Noise Power

Passive chipset heatsinks and standard CPU cooler mounts manage heat within typical rack airflow. The board draws power through ATX and auxiliary connectors to feed two Opteron processors, memory, and onboard SCSI controllers. Acoustic output depends entirely on the chassis fans and CPU coolers selected by the integrator. No active cooling components are included on the board itself.

Connectors Storage RAID

Four Serial ATA-150 ports support RAID configurations for internal drives. An Ultra320 SCSI interface connects via two 68-pin high-density connectors for external or internal arrays. Two 40-pin IDC headers provide ATA-133 connectivity for legacy devices. The board ships without cables, brackets, or driver media, so installers must source matching interconnects separately.

Puncte forte

  • Dual Gigabit Ethernet for redundant server networking
  • AMD-8111/8131 chipset powers dual Opteron 200 series processors
  • 16 GB DDR SDRAM capacity handles heavy workloads
  • Ultra320 SCSI plus ATA-133 and Serial ATA-150 RAID storage
  • ATI RAGE XL graphics provides basic server video output

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How do I install the Opteron 200 series CPU into the Socket 940 without bending pins?

Align the gold triangle on the processor with the matching corner of the Socket 940, lower it straight down without force, then close the retention lever; the step most people miss is verifying the lever locks fully flush before applying thermal paste.

Which components on the S2881UG2NR will need replacement after long-term server duty?

The ATI RAGE XL graphics chip and onboard DDR SDRAM slots are soldered and not serviceable; plan to replace the CMOS battery and any Ultra320 SCSI or ATA-133 drives connected to the 68pin HD and 40pin IDC connectors when they reach end of life.

What is the first limit I will hit running the dual Gigabit Ethernet ports at full throughput?

The AMD-8111 / AMD-8131 chipset and 32-bit PCI bus cap combined network throughput well below the theoretical 2 Gbps, so sustained heavy traffic saturates the bus before the Ethernet controllers do.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.