Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Small green development board with CI1302 chip, Type-C and pin headers, compact rectangular shape

Yahboom AI Voice Interaction Module development board 110 commands 99% accuracy CI1302

SKU CH-5PSQ-Q3SD7

Voice interaction board with 110 editable commands, 99% recognition accuracy via CI1302 chip, and IIC, serial and Type-C links for Jetson, Raspberry Pi, ESP32 and STM32

  • 110 preset voice commands editable online for custom control
  • 99% recognition accuracy via CI1302 neural network chip with noise reduction
  • Compatible with Jetson, Raspberry Pi, ESP32, STM32 and ROS1/ROS2 SDKs
  • Plug-and-play IIC, serial and Type-C interfaces with included connection cables
  • Programmable wake-up words and multi-language support for global projects

AI Voice Interaction Module

The Yahboom AI Voice Interaction Module is a development board built around the CI1302 chip with an integrated neural network processor. It delivers measured 99% recognition accuracy while suppressing environmental noise and echo. The board supports over 110 preset voice commands that can be customised online and flashed via a Windows tool.

Makers adding voice control to robots

This module suits developers who want plug-and-play voice recognition for STM32, ESP32, Arduino, Raspberry Pi or Jetson platforms with ROS1 and ROS2 SDK support. Buyers who need a completely offline workflow without account registration for wake-word editing should look elsewhere. The firmware generator runs on Windows only.

Integrates with ROS robots and SBCs

Onboard IIC, serial and Type-C interfaces plus supplied PH2.0 and DuPont cables allow quick connection to single-chip controllers or embedded hosts. The slot mounting design gives flexible installation inside robot chassis such as the ROSMASTER series. A registered account is required to access the web configuration portal.

Βασικά χαρακτηριστικά

  • 110 preset voice commands editable online for custom control
  • 99% recognition accuracy via CI1302 neural network chip with noise reduction
  • Compatible with Jetson, Raspberry Pi, ESP32, STM32 and ROS1/ROS2 SDKs
  • Plug-and-play IIC, serial and Type-C interfaces with included connection cables
  • Programmable wake-up words and multi-language support for global projects

Προδιαγραφές

BrandYahboom
ModelAI Voice Interaction Module
Part NumberAI Voice Interaction Module

Ερωτήσεις για αυτό το προϊόν

What host board and physical connection do I need to start using the CI1302 voice module?

Connect the module to a Raspberry Pi, Jetson, ESP32 or STM32 board using the supplied Type‑C, PH2.0 or DuPont cables; the board provides the power and the IIC or serial link the module requires.

Will the module work with an older Raspberry Pi 4 running ROS 1 Melodic?

Yes — the supplied ROS 1/ROS 2 SDK supports Melodic on Ubuntu 22.04 or Raspberry Pi OS, so the module can run alongside a Pi 4 without firmware changes.

How can I confirm the module recognises my custom wake‑up word after flashing?

Speak the word; the on‑board LED flashes and the serial output prints the recognised command ID, showing the 99 % accuracy engine has triggered.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.