Black 70×25 mm 3-pin case fan with maglev bearing

Zyvpee

Zyvpee KDE1207PTV1 70×25 mm 3-pin 12 V 1.4 W case fan

SKU CH-AGPZ-TV7D3

A 70×25 mm Maglev case fan running below 1600 RPM with a 3-pin 12 V 1.4 W connector for CPU cooler mounting

TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack

Maglev bearing reduces friction for quieter operation
12 V 1.4 W power draw keeps energy use low
70 mm × 25 mm frame fits standard 7025 mounts
Three-pin connector enables direct motherboard control
Sub-1600 RPM speed balances airflow and noise

23,99 $

0.00030983 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 375,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Compact 70 mm maglev fan for CPU coolers

The Zyvpee KDE1207PTV1 is a 70 by 25 millimetre case fan built for CPU cooler mounting. It runs on 12 volts and draws 1.4 watts through a three-pin power connector. The maglev bearing keeps friction low while the black non-LED frame suits understated builds.

Three-pin voltage control limits speed precision

The 3-pin connector adjusts fan speed by varying voltage rather than a PWM signal. This means the fan cannot hold a target RPM as tightly as a four-pin design and may not spin down to zero. Builders who need fine-grained curves or semi-passive operation should note this constraint.

1600 RPM ceiling defines thermal headroom

Maximum rotational speed is rated below 1600 RPM, setting the upper bound for airflow and static pressure. If your cooler demands higher RPM to meet its TDP target, this fan will not deliver enough cooling capacity.

Βασικά χαρακτηριστικά

Maglev bearing reduces friction for quieter operation
12 V 1.4 W power draw keeps energy use low
70 mm × 25 mm frame fits standard 7025 mounts
Three-pin connector enables direct motherboard control
Sub-1600 RPM speed balances airflow and noise

Προδιαγραφές

Brand	Zyvpee
Series	KDE1207PTV1
Model	KDE1207PTV1
Type	CPU Cooler Fan
Compatibility	CPU Cooler
Bearing Type	Maglev
RPM	<1600 RPM
Power Connector	3 Pin
Color	Black
LED	Non-LED
Features	CPU Cooling Fan
Dimensions	70*20MM

Ερωτήσεις για αυτό το προϊόν

Which Zyvpee KDE1207PTV1 version should I choose for my CPU cooler?

This model is a single 70 mm × 25 mm Maglev fan rated at 12 V, 1.4 W with a 3-pin connector; there are no alternative capacities or versions listed, so this exact specification is the only one to select.

What does the <1600 RPM figure mean once the fan is installed?

The fan will spin at up to 1600 revolutions per minute, delivering airflow for CPU cooling while the Maglev bearing keeps noise low at that speed.

What does the 3-pin connector cap in practice?

The 3-pin DC connector allows the motherboard to monitor speed via the tach wire and vary voltage for basic speed control, but it does not support PWM duty-cycle regulation.

Επίσης σε αυτό το ράφι