Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Four green DDR3 ECC UDIMM sticks, 240-pin, silver heatsinks

A-Tech

A-Tech 32GB 4x8GB DDR3 1333 ECC UDIMM 2Rx8 1.5V Server RAM

SKU CH-DGRV-FJR96

A 32 GB quad-channel DDR3 ECC unbuffered kit for compatible servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (4 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 32 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600E system specifications
  • ECC unbuffered design detects and corrects single-bit data errors
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • Quad-channel 4 x 8 GB layout maximises memory bandwidth on supported boards

32 GB DDR3 ECC kit for servers

This kit delivers 32 GB of DDR3 1333 ECC unbuffered memory across four 8 GB modules. It is built for servers and workstations that require error-correcting code and dual-rank 2Rx8 organisation at 1.5 V.

Suits DDR3 ECC UDIMM platforms only

It fits systems that accept 240-pin DDR3 ECC unbuffered DIMMs running at PC3-10600 speed. Desktop or laptop computers that use non-ECC or registered memory cannot use these modules.

Quad-channel kit enables full bandwidth

The matched set of four modules populates all channels on a compatible quad-channel board. This arrangement lets the memory controller interleave data across the full width for maximum throughput.

Põhijooned

  • 32 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600E system specifications
  • ECC unbuffered design detects and corrects single-bit data errors
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • Quad-channel 4 x 8 GB layout maximises memory bandwidth on supported boards

Tehnilised andmed

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-10600E
Capacity32GB (4 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

My motherboard has four DDR3 DIMM slots — will this 4x8GB quad-channel kit fill all of them and run at 1333 MHz?

Yes, the kit contains four 240-pin DDR3 UDIMMs that occupy four slots; the modules are rated for DDR3 1333 (PC3-10600) operation at CL9.

I still have a pair of older 4GB DDR3 ECC UDIMMs — can I keep them installed alongside this 32GB kit?

Mixing different capacities and ranks is not recommended; the 2Rx8 modules in this kit may cause timing conflicts or prevent the system from posting if combined with mismatched DIMMs.

After installation, how do I confirm the ECC function is active on all four modules?

Enter the BIOS/UEFI memory information screen — it should report ECC enabled and show the correct speed and rank for each populated slot.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.