Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR3 ECC UDIMM sticks, 240-pin, silver heatsinks

A-Tech

A-Tech 32GB 4x8GB DDR3 1333 ECC UDIMM 2Rx8 1.5V Server RAM

SKU CH-DGRV-FJR96

A 32 GB quad-channel DDR3 ECC unbuffered kit for compatible servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (4 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 32 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600E system specifications
  • ECC unbuffered design detects and corrects single-bit data errors
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • Quad-channel 4 x 8 GB layout maximises memory bandwidth on supported boards

32 GB DDR3 ECC kit for servers

This kit delivers 32 GB of DDR3 1333 ECC unbuffered memory across four 8 GB modules. It is built for servers and workstations that require error-correcting code and dual-rank 2Rx8 organisation at 1.5 V.

Suits DDR3 ECC UDIMM platforms only

It fits systems that accept 240-pin DDR3 ECC unbuffered DIMMs running at PC3-10600 speed. Desktop or laptop computers that use non-ECC or registered memory cannot use these modules.

Quad-channel kit enables full bandwidth

The matched set of four modules populates all channels on a compatible quad-channel board. This arrangement lets the memory controller interleave data across the full width for maximum throughput.

Puncte forte

  • 32 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed matches PC3-10600E system specifications
  • ECC unbuffered design detects and corrects single-bit data errors
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • Quad-channel 4 x 8 GB layout maximises memory bandwidth on supported boards

Specificații

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-10600E
Capacity32GB (4 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

My motherboard has four DDR3 DIMM slots — will this 4x8GB quad-channel kit fill all of them and run at 1333 MHz?

Yes, the kit contains four 240-pin DDR3 UDIMMs that occupy four slots; the modules are rated for DDR3 1333 (PC3-10600) operation at CL9.

I still have a pair of older 4GB DDR3 ECC UDIMMs — can I keep them installed alongside this 32GB kit?

Mixing different capacities and ranks is not recommended; the 2Rx8 modules in this kit may cause timing conflicts or prevent the system from posting if combined with mismatched DIMMs.

After installation, how do I confirm the ECC function is active on all four modules?

Enter the BIOS/UEFI memory information screen — it should report ECC enabled and show the correct speed and rank for each populated slot.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.