Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

A-Tech

A-Tech 32GB DDR4 2933 ECC UDIMM 2Rx8 Server RAM

SKU CH-XZP3-4WWCN

32 GB DDR4 2933 ECC unbuffered DIMM with 2Rx8 organisation and CL21 latency

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server memory slots

32GB DDR4 2933 ECC UDIMM for Servers

This A-Tech module delivers 32GB of DDR4 2933 (PC4-23400) ECC unbuffered memory in a single 288-pin DIMM. It targets server and workstation operators who need error-correcting capacity without registered buffering. The CL21 latency and 1.20V operation match standard DDR4 specifications for compatible platforms.

Major-brand chips on 2Rx8 unbuffered layout

Built with major-brand chipset components in a 2Rx8 configuration, the stick fits standard DDR4 DIMM slots on boards that accept ECC UDIMM modules. Unbuffered design keeps electrical loading low for consumer-derived server boards, while the 288-pin interface ensures physical compatibility with DDR4-only sockets.

Replaces Samsung M391A4G43AB1-CVF modules

This unit serves as a direct equivalent for the Samsung M391A4G43AB1-CVF part number, letting administrators expand or refresh memory in qualified systems. The jump is worthwhile when workloads demand ECC integrity at 2933 MT/s and the platform supports unbuffered DDR4 DIMMs rather than registered or load-reduced variants.

Põhijooned

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server memory slots

Tehnilised andmed

BrandA-Tech
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Küsimused selle toote kohta

What speed does the DDR4 2933 PC4-23400 interface actually run at in a system?

The module is rated for DDR4 2933 MT/s (PC4-23400). It will operate at that speed if the platform supports it; otherwise it downclocks to the highest speed the memory controller allows.

What physical slot and clearance does the 288-pin ECC UDIMM need?

It fits a standard DDR4 288-pin DIMM slot. As an unbuffered ECC UDIMM it has the same height and keying as regular DDR4 DIMMs, so no extra clearance is required beyond the slot itself.

How do I install the 32 GB 2Rx8 module and what step is often missed?

Power off, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click. The step often missed is confirming the system BIOS recognises the full 32 GB capacity and ECC function after boot.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.