Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black chips, 32GB ECC UDIMM

A-Tech

A-Tech 32GB DDR4 2933 ECC UDIMM 2Rx8 Server RAM

SKU CH-XZP3-4WWCN

32 GB DDR4 2933 ECC unbuffered DIMM with 2Rx8 organisation and CL21 latency

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server memory slots

32GB DDR4 2933 ECC UDIMM for Servers

This A-Tech module delivers 32GB of DDR4 2933 (PC4-23400) ECC unbuffered memory in a single 288-pin DIMM. It targets server and workstation operators who need error-correcting capacity without registered buffering. The CL21 latency and 1.20V operation match standard DDR4 specifications for compatible platforms.

Major-brand chips on 2Rx8 unbuffered layout

Built with major-brand chipset components in a 2Rx8 configuration, the stick fits standard DDR4 DIMM slots on boards that accept ECC UDIMM modules. Unbuffered design keeps electrical loading low for consumer-derived server boards, while the 288-pin interface ensures physical compatibility with DDR4-only sockets.

Replaces Samsung M391A4G43AB1-CVF modules

This unit serves as a direct equivalent for the Samsung M391A4G43AB1-CVF part number, letting administrators expand or refresh memory in qualified systems. The jump is worthwhile when workloads demand ECC integrity at 2933 MT/s and the platform supports unbuffered DDR4 DIMMs rather than registered or load-reduced variants.

Kohokohdat

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server memory slots

Tekniset tiedot

BrandA-Tech
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What speed does the DDR4 2933 PC4-23400 interface actually run at in a system?

The module is rated for DDR4 2933 MT/s (PC4-23400). It will operate at that speed if the platform supports it; otherwise it downclocks to the highest speed the memory controller allows.

What physical slot and clearance does the 288-pin ECC UDIMM need?

It fits a standard DDR4 288-pin DIMM slot. As an unbuffered ECC UDIMM it has the same height and keying as regular DDR4 DIMMs, so no extra clearance is required beyond the slot itself.

How do I install the 32 GB 2Rx8 module and what step is often missed?

Power off, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click. The step often missed is confirming the system BIOS recognises the full 32 GB capacity and ECC function after boot.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.