A-Tech
A-Tech 4GB DDR4 2666MHz CL19 260-Pin SODIMM Laptop RAM
4GB DDR4 2666MHz CL19 260-pin SODIMM laptop memory compatible with HP part numbers 937356-800, L10598-850 and L33259-001
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 4GB DDR4 module adds responsive capacity for everyday multitasking
- 2666MHz speed with CL19 timing delivers standard laptop performance
- 2V operation matches DDR4 specification for efficient power use
- 260-pin SO-DIMM form factor fits compatible HP laptop slots
- Tested replacement for HP part numbers 937356-800, L10598-850, L33259-001
4GB DDR4 2666MHz SODIMM for HP Laptops
This 4GB DDR4 2666MHz CL19 module is built as a direct replacement for HP part numbers 937356-800, L10598-850 and L33259-001. It targets owners of compatible HP laptops, notebooks and all-in-one systems who need to restore or expand memory capacity with a verified match.
260-Pin Unbuffered Design at 1.2V
The stick uses a standard 260-pin SO-DIMM edge connector and runs at the DDR4 default voltage of 1.20V. It is unbuffered and non-ECC, so it drops into ordinary consumer laptop slots without requiring server-grade chipset support. No heat spreader is fitted, keeping the profile low for tight chassis clearances.
Steps Up from 2GB or Slower DDR4
Replacing a 2GB module or a slower DDR4 SO-DIMM with this 4GB PC4-21300 unit adds headroom for everyday multitasking and reduces swap-file activity. The upgrade is worthwhile when the system board accepts 2666MHz CL19 memory and the user wants a tested, lifetime-warranted module rather than an unverified alternative.
Põhijooned
- 4GB DDR4 module adds responsive capacity for everyday multitasking
- 2666MHz speed with CL19 timing delivers standard laptop performance
- 2V operation matches DDR4 specification for efficient power use
- 260-pin SO-DIMM form factor fits compatible HP laptop slots
- Tested replacement for HP part numbers 937356-800, L10598-850, L33259-001
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 937356-800, L10598-850, L33259-001 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | 937356-800, L10598-850, L33259-001 |
| Recommend Use | Compatible Replacement for HP 937356-800, L10598-850, L33259-001 |
Küsimused selle toote kohta
What speed does the DDR4 2666MHz PC4-21300 interface actually run at in a laptop?
The module is rated for 2666 MT/s. The memory controller in the laptop will set the final speed, which can be lower if the system only supports a slower DDR4 rate.
Will this 260-pin SO-DIMM fit the memory slot in my HP laptop?
It uses the standard 260-pin DDR4 SO-DIMM form factor. The stick is physically compatible with any laptop slot that accepts DDR4 SO-DIMMs, including the HP part numbers 937356-800, L10598-850 and L33259-001.
What is the correct way to seat the module, and what step do people often miss?
Align the notch with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into the notches. The step often missed is pressing hard enough to engage both clips fully.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



