A-Tech
A-Tech 4GB DDR4 2666MHz CL19 260-Pin SODIMM Laptop RAM
4GB DDR4 2666MHz CL19 260-pin SODIMM laptop memory compatible with HP part numbers 937356-800, L10598-850 and L33259-001
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 4GB DDR4 module adds responsive capacity for everyday multitasking
- 2666MHz speed with CL19 timing delivers standard laptop performance
- 2V operation matches DDR4 specification for efficient power use
- 260-pin SO-DIMM form factor fits compatible HP laptop slots
- Tested replacement for HP part numbers 937356-800, L10598-850, L33259-001
4GB DDR4 2666MHz SODIMM for HP Laptops
This 4GB DDR4 2666MHz CL19 module is built as a direct replacement for HP part numbers 937356-800, L10598-850 and L33259-001. It targets owners of compatible HP laptops, notebooks and all-in-one systems who need to restore or expand memory capacity with a verified match.
260-Pin Unbuffered Design at 1.2V
The stick uses a standard 260-pin SO-DIMM edge connector and runs at the DDR4 default voltage of 1.20V. It is unbuffered and non-ECC, so it drops into ordinary consumer laptop slots without requiring server-grade chipset support. No heat spreader is fitted, keeping the profile low for tight chassis clearances.
Steps Up from 2GB or Slower DDR4
Replacing a 2GB module or a slower DDR4 SO-DIMM with this 4GB PC4-21300 unit adds headroom for everyday multitasking and reduces swap-file activity. The upgrade is worthwhile when the system board accepts 2666MHz CL19 memory and the user wants a tested, lifetime-warranted module rather than an unverified alternative.
Poudarki
- 4GB DDR4 module adds responsive capacity for everyday multitasking
- 2666MHz speed with CL19 timing delivers standard laptop performance
- 2V operation matches DDR4 specification for efficient power use
- 260-pin SO-DIMM form factor fits compatible HP laptop slots
- Tested replacement for HP part numbers 937356-800, L10598-850, L33259-001
Specifikacije
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 937356-800, L10598-850, L33259-001 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | 937356-800, L10598-850, L33259-001 |
| Recommend Use | Compatible Replacement for HP 937356-800, L10598-850, L33259-001 |
Vprašanja o tem izdelku
What speed does the DDR4 2666MHz PC4-21300 interface actually run at in a laptop?
The module is rated for 2666 MT/s. The memory controller in the laptop will set the final speed, which can be lower if the system only supports a slower DDR4 rate.
Will this 260-pin SO-DIMM fit the memory slot in my HP laptop?
It uses the standard 260-pin DDR4 SO-DIMM form factor. The stick is physically compatible with any laptop slot that accepts DDR4 SO-DIMMs, including the HP part numbers 937356-800, L10598-850 and L33259-001.
What is the correct way to seat the module, and what step do people often miss?
Align the notch with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into the notches. The step often missed is pressing hard enough to engage both clips fully.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



