Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green 288-pin DDR5 RDIMM module with black memory chips, no heat spreader

A-Tech

A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 EC8 Micron Replacement Server RAM

SKU CH-N24S-RWEMW

64 GB DDR5 4800 ECC registered DIMM with 2Rx4 Micron chips, CL40 at 1.1 V

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 64GB capacity handles demanding server workloads
  • DDR5 4800MHz speed delivers high bandwidth performance
  • ECC registered design ensures data integrity protection
  • 2Rx4 dual-rank architecture maximises memory density
  • 10V standard voltage maintains efficient power consumption

What this product is

The A-Tech 64GB DDR5 4800 ECC RDIMM is a registered server memory module built with Micron chipset components. It operates at 4800 MT/s with a CAS latency of 40 and runs at the standard 1.10 V. The module uses a 288-pin form factor and a 2Rx4 organisation for high-density capacity in a single stick.

Who this suits and who it does not

This module suits administrators upgrading Micron-based servers that require registered ECC DDR5 memory in a 64 GB density. It is not for desktop PCs or laptops that accept only unbuffered non-ECC DIMMs. Buyers who need a heat spreader or a lower latency rating should look at a different product.

What to check before ordering

Confirm that your system supports DDR5 registered ECC RDIMMs and that the memory controller can address a 64 GB 2Rx4 module at 4800 MT/s. Verify the motherboard has free 288-pin DDR5 slots and consult the vendor’s qualified-vendor list for this exact Micron part number. Ensure the platform accepts 1.10 V operation without additional voltage configuration.

Põhijooned

  • 64GB capacity handles demanding server workloads
  • DDR5 4800MHz speed delivers high bandwidth performance
  • ECC registered design ensures data integrity protection
  • 2Rx4 dual-rank architecture maximises memory density
  • 10V standard voltage maintains efficient power consumption

Tehnilised andmed

BrandA-Tech
SeriesCompatible Replacement for Micron MTC40F204651RC48BAS MTC40F2046S1RC48BAX
ModelA-Tech 64GB DDR5-4800 ECC RDIMM Server RAM Module
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Küsimused selle toote kohta

Does my server need DDR5 RDIMM slots that accept 288-pin modules running at 1.1 V?

Yes, this is a 288-pin DDR5 RDIMM that operates at 1.1 V, so the motherboard must provide DDR5 registered DIMM slots with that voltage.

Can I install this 64 GB 2Rx4 ECC RDIMM alongside existing DDR5 4800 ECC RDIMMs of different capacity?

Mixing is possible if the platform supports mixed-capacity DDR5 ECC RDIMMs at 4800 MT/s, but the memory controller will run all modules at the lowest common speed and timing.

How can I confirm the module is detected at 4800 MT/s with ECC active after installation?

Check the BIOS memory information or the OS memory report — both should show 64 GB at 4800 MT/s with ECC enabled and the correct 2Rx4 rank configuration.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.