Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 288-pin DDR5 RDIMM module with black memory chips, no heat spreader

A-Tech

A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 EC8 Micron Replacement Server RAM

SKU CH-N24S-RWEMW

64 GB DDR5 4800 ECC registered DIMM with 2Rx4 Micron chips, CL40 at 1.1 V

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 64GB capacity handles demanding server workloads
  • DDR5 4800MHz speed delivers high bandwidth performance
  • ECC registered design ensures data integrity protection
  • 2Rx4 dual-rank architecture maximises memory density
  • 10V standard voltage maintains efficient power consumption

What this product is

The A-Tech 64GB DDR5 4800 ECC RDIMM is a registered server memory module built with Micron chipset components. It operates at 4800 MT/s with a CAS latency of 40 and runs at the standard 1.10 V. The module uses a 288-pin form factor and a 2Rx4 organisation for high-density capacity in a single stick.

Who this suits and who it does not

This module suits administrators upgrading Micron-based servers that require registered ECC DDR5 memory in a 64 GB density. It is not for desktop PCs or laptops that accept only unbuffered non-ECC DIMMs. Buyers who need a heat spreader or a lower latency rating should look at a different product.

What to check before ordering

Confirm that your system supports DDR5 registered ECC RDIMMs and that the memory controller can address a 64 GB 2Rx4 module at 4800 MT/s. Verify the motherboard has free 288-pin DDR5 slots and consult the vendor’s qualified-vendor list for this exact Micron part number. Ensure the platform accepts 1.10 V operation without additional voltage configuration.

Priekšrocības

  • 64GB capacity handles demanding server workloads
  • DDR5 4800MHz speed delivers high bandwidth performance
  • ECC registered design ensures data integrity protection
  • 2Rx4 dual-rank architecture maximises memory density
  • 10V standard voltage maintains efficient power consumption

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Micron MTC40F204651RC48BAS MTC40F2046S1RC48BAX
ModelA-Tech 64GB DDR5-4800 ECC RDIMM Server RAM Module
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Jautājumi par šo preci

Does my server need DDR5 RDIMM slots that accept 288-pin modules running at 1.1 V?

Yes, this is a 288-pin DDR5 RDIMM that operates at 1.1 V, so the motherboard must provide DDR5 registered DIMM slots with that voltage.

Can I install this 64 GB 2Rx4 ECC RDIMM alongside existing DDR5 4800 ECC RDIMMs of different capacity?

Mixing is possible if the platform supports mixed-capacity DDR5 ECC RDIMMs at 4800 MT/s, but the memory controller will run all modules at the lowest common speed and timing.

How can I confirm the module is detected at 4800 MT/s with ECC active after installation?

Check the BIOS memory information or the OS memory report — both should show 64 GB at 4800 MT/s with ECC enabled and the correct 2Rx4 rank configuration.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.