A-Tech
A-Tech 8GB (2x4GB) DDR3L 1600 ECC SODIMM CL11 1.35V 204-Pin Kit
Dual-channel ECC SODIMM kit adds 8 GB of DDR3L 1600 memory for microservers and NAS servers
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
Capacity 8GB (2 x 4GB)
- 16GB (2 x 8GB)
- 8GB
- 8GB (2 x 4GB)
- 4GB
Speed DDR3L 1600 (PC3L 12800)
- DDR3 1333 (PC3 10600)
- DDR3 1600 (PC3 12800)
- DDR3L 1333 (PC3L 10600)
- DDR3L 1600 (PC3L 12800)
CAS Latency CL11
- CL9
- CL11
- ECC protection prevents data errors in critical workloads
- Unbuffered DDR3L 1600 MHz CL11 modules
- Dual-channel 8 GB kit with two 4 GB sticks
- Low-voltage 1.35 V operation reduces power draw
- 204-pin SO-DIMM form factor fits compatible laptops
Kit Composition
This A-Tech kit supplies eight gigabytes of DDR3L ECC memory in two matched four-gigabyte SODIMM modules. It targets administrators upgrading microservers, mobile workstations or NAS appliances that require error-correcting unbuffered SO-DIMMs.
Build Integration
Each stick uses the 204-pin SO-DIMM form factor and runs at 1600 MHz with CL11 latency at 1.35 volts, falling back to 1.5 volts on platforms that do not support DDR3L. The dual-channel pair frees the second memory slot on two-slot boards while satisfying ECC requirements.
Suitability
Buyers needing ECC protection for ZFS, FreeNAS or virtualisation hosts will benefit from the single-rank 1Rx8 organisation. Systems limited to non-ECC DDR3 or requiring registered modules cannot use this kit.
Põhijooned
- ECC protection prevents data errors in critical workloads
- Unbuffered DDR3L 1600 MHz CL11 modules
- Dual-channel 8 GB kit with two 4 GB sticks
- Low-voltage 1.35 V operation reduces power draw
- 204-pin SO-DIMM form factor fits compatible laptops
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 ECC SODIMM |
| Model | A-Tech 4GB 1Rx8 PC3L-12800 ECC SODIMM |
| Part Number | NE-SS-0588 |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
A-Tech
A-Tech 4GB DDR3 1600 ECC SODIMM CL11 1.5V 204-Pin 1Rx8
- 4GB
- 204-Pin DDR3 SO-DIMM
17,99 $
0.0002277BTC
Laos
A-Tech
A-Tech 8GB DDR3 1333 ECC SODIMM 204-Pin 1.5V 2Rx8
- 8GB
- 204-Pin DDR3 SO-DIMM
34,99 $
0.00044287BTC
Laos
A-Tech
A-Tech 8GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V 2Rx8 laptop RAM
- 8GB
- 204-Pin DDR3 SO-DIMM
36,99 $
0.00046818BTC
LaosKüsimused selle toote kohta
Does the CL11 latency at 1600 MHz become the bottleneck under sustained workloads?
The modules run at DDR3L 1600 with CL11 timing, which is the rated speed limit for this kit under continuous use.
How much heat and power do two 1.35 V modules draw during all-day operation?
Each module operates at 1.35 V DDR3L low voltage, reducing power draw and heat compared with standard 1.5 V DDR3.
What must my system already support for this 204-pin ECC kit to work?
The platform must accept DDR3 or DDR3L ECC unbuffered SO-DIMM memory in a 204-pin slot and support single-rank 1Rx8 modules.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0049614BTC
Laos
