A-Tech
A-Tech 8GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V 2Rx8 laptop RAM
ECC SODIMM module adds 8 GB of DDR3L 1600 memory with error correction for compatible laptops and servers
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
Capacity 8GB
Speed DDR3L 1600 (PC3L 12800)
- DDR3 1333 (PC3 10600)
- DDR3 1600 (PC3 12800)
- DDR3L 1333 (PC3L 10600)
- DDR3L 1600 (PC3L 12800)
CAS Latency CL11
- CL9
- CL11
- ECC protection prevents data errors in critical workloads
- Unbuffered 1.35 V DDR3L module runs at 1600 MHz CL11
- 8 GB dual-rank 2Rx8 density fits single SODIMM slot
- 204-pin form factor installs in compatible microserver and NAS boards
- JEDEC low-voltage spec allows operation at 1.35 V or 1.5 V
Capacity and fit
This A-Tech module provides 8GB of DDR3L memory in a 204-pin SO-DIMM form factor. It targets owners of microservers, mobile workstations and NAS servers that require ECC unbuffered SODIMM modules. The dual-rank 2Rx8 organisation suits platforms that support this density. Buyers needing non-ECC laptop memory or a different DDR generation should look elsewhere.
Sustained operation
Rated at 1600 MHz with CL11 latency, the module runs at the JEDEC low-voltage level of 1.35V and can also operate at 1.5V where the platform requires it. ECC circuitry detects and corrects single-bit errors during continuous workloads, helping data integrity in server and NAS environments. All units undergo quality-assurance testing before shipment to verify reliable performance under load.
Compatibility check
Confirm that your system explicitly supports DDR3 ECC unbuffered SODIMM memory before ordering. Consult the motherboard or chassis manual for the maximum supported capacity per slot and the correct slot-population rules for dual-rank modules. Verify that the BIOS recognises ECC functionality, as some platforms disable it even when the hardware is present.
Põhijooned
- ECC protection prevents data errors in critical workloads
- Unbuffered 1.35 V DDR3L module runs at 1600 MHz CL11
- 8 GB dual-rank 2Rx8 density fits single SODIMM slot
- 204-pin form factor installs in compatible microserver and NAS boards
- JEDEC low-voltage spec allows operation at 1.35 V or 1.5 V
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 ECC SODIMM |
| Model | A-Tech 8GB 2Rx8 PC3L-12800 ECC SODIMM |
| Part Number | NE-SS-0563 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
A-Tech 8GB (2x4GB) DDR3L 1600 ECC SODIMM CL11 1.35V 204-Pin Kit
- 8GB (2 x 4GB)
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB DDR3 1333 ECC SODIMM 204-Pin 1.5V 2Rx8
- 8GB
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB (2x4GB) DDR3 1600 ECC SODIMM 204-Pin 1.5V laptop RAM
- 8GB (2 x 4GB)
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB (2x4GB) DDR3L 1333 ECC SODIMM 204-Pin 1.35V
- 8GB (2 x 4GB)
- 204-Pin DDR3 SO-DIMM
Küsimused selle toote kohta
How much power does the 1.35V DDR3L module draw when the laptop runs all day?
The module operates at 1.35V JEDEC low voltage, reducing power draw compared to standard 1.5V DDR3 while maintaining 1600 MHz speed.
What must my laptop already support for this ECC SODIMM to function?
Your system must accept DDR3 ECC unbuffered SO-DIMM modules and have a 204-pin slot; verify the manual for ECC support before installing.
Will this 2Rx8 dual-rank stick work alongside older single-rank DDR3 modules I keep?
Mixing 2Rx8 dual-rank with single-rank DDR3 is possible if the platform supports mixed ranks, but check the system manual for channel population rules.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.








