Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green printed circuit board with black memory chips and gold edge connectors no heat spreader

A-Tech

A-Tech 8GB DDR3 1866MHz CL13 Desktop RAM

SKU CH-441W-KCGFB

An 8 GB DDR3 1866 MHz CL13 desktop DIMM rated at 1.5 V for compatible Corsair system upgrades

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 8GB capacity lifts multitasking headroom for everyday workloads
  • 1866MHz DDR3 speed moves data quickly through the system
  • CL13 latency keeps response tight during heavy use
  • 5V standard voltage fits stock desktop power rails
  • 240-pin DIMM form factor drops into regular desktop slots

8GB DDR3 1866MHz desktop module

This A-Tech module provides eight gigabytes of DDR3 memory at 1866MHz with CL13 latency. It is an unbuffered non-ECC DIMM that runs at the standard 1.5V. The stick is built as a direct replacement for Corsair CMZ32GX3M4X1866C10R and CMZ32GX3M4A1866C9 kits. It targets owners of older desktops that still use DDR3 platforms.

240-pin DIMM without heat spreader

The module uses a standard 240-pin DDR3 DIMM edge connector, so it fits any desktop board with DDR3 slots. No heat spreader is fitted, keeping the profile low for tight spaces or large CPU coolers. Major-brand chips are used and every unit is tested before shipping. The bare PCB design also makes visual inspection simple.

Replaces Corsair CMZ32GX3M4X1866C10R

This single 8GB stick substitutes for one module from those 32GB Corsair quad-channel kits. The rated speed is 1866MHz PC3-14900 with CL13 timing at 1.5V. The upgrade is worth it when a system needs more capacity or a failed stick must be swapped without changing the remaining modules.

Põhijooned

  • 8GB capacity lifts multitasking headroom for everyday workloads
  • 1866MHz DDR3 speed moves data quickly through the system
  • CL13 latency keeps response tight during heavy use
  • 5V standard voltage fits stock desktop power rails
  • 240-pin DIMM form factor drops into regular desktop slots

Tehnilised andmed

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9
Recommend UseCompatible Replacement for Corsair CMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9

Küsimused selle toote kohta

Does the DDR3 1866 PC3-14900 module run at 1866 MHz out of the box?

The module is tested at 1866 MHz with a CAS latency of CL13 and operates at the standard 1.5 V for DDR3.

Will this 240-pin DIMM fit a standard desktop DDR3 slot?

The stick uses the 240-pin DDR3 DIMM form factor and is an unbuffered non-ECC module designed for desktop motherboards.

Do I need to enable XMP in the BIOS to reach the rated speed?

Install the DIMM firmly until the retention clips click, then enter the BIOS and select the 1866 MHz profile or set frequency manually to 1866 MHz.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.