A-Tech
A-Tech 8GB DDR3 1866MHz CL13 Desktop RAM
An 8 GB DDR3 1866 MHz CL13 desktop DIMM rated at 1.5 V for compatible Corsair system upgrades
- Capacity8GB
- SpeedDDR3 1866 (PC3 14900)
- Tested Frequency1866
- CAS LatencyCL13
- Voltage1.50V
- ECCNo
- 8GB capacity lifts multitasking headroom for everyday workloads
- 1866MHz DDR3 speed moves data quickly through the system
- CL13 latency keeps response tight during heavy use
- 5V standard voltage fits stock desktop power rails
- 240-pin DIMM form factor drops into regular desktop slots
8GB DDR3 1866MHz desktop module
This A-Tech module provides eight gigabytes of DDR3 memory at 1866MHz with CL13 latency. It is an unbuffered non-ECC DIMM that runs at the standard 1.5V. The stick is built as a direct replacement for Corsair CMZ32GX3M4X1866C10R and CMZ32GX3M4A1866C9 kits. It targets owners of older desktops that still use DDR3 platforms.
240-pin DIMM without heat spreader
The module uses a standard 240-pin DDR3 DIMM edge connector, so it fits any desktop board with DDR3 slots. No heat spreader is fitted, keeping the profile low for tight spaces or large CPU coolers. Major-brand chips are used and every unit is tested before shipping. The bare PCB design also makes visual inspection simple.
Replaces Corsair CMZ32GX3M4X1866C10R
This single 8GB stick substitutes for one module from those 32GB Corsair quad-channel kits. The rated speed is 1866MHz PC3-14900 with CL13 timing at 1.5V. The upgrade is worth it when a system needs more capacity or a failed stick must be swapped without changing the remaining modules.
Highlights
- 8GB capacity lifts multitasking headroom for everyday workloads
- 1866MHz DDR3 speed moves data quickly through the system
- CL13 latency keeps response tight during heavy use
- 5V standard voltage fits stock desktop power rails
- 240-pin DIMM form factor drops into regular desktop slots
Specifications
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9 |
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| Tested Frequency | 1866 |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9 |
| Recommend Use | Compatible Replacement for Corsair CMZ32GX3M4X1866C10R, CMZ32GX3M4A1866C9 |
Questions about this item
Does the DDR3 1866 PC3-14900 module run at 1866 MHz out of the box?
The module is tested at 1866 MHz with a CAS latency of CL13 and operates at the standard 1.5 V for DDR3.
Will this 240-pin DIMM fit a standard desktop DDR3 slot?
The stick uses the 240-pin DDR3 DIMM form factor and is an unbuffered non-ECC module designed for desktop motherboards.
Do I need to enable XMP in the BIOS to reach the rated speed?
Install the DIMM firmly until the retention clips click, then enter the BIOS and select the 1866 MHz profile or set frequency manually to 1866 MHz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00419592BTC
In stock