Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green rectangular 240-pin DDR3L DIMM with black chips and silver edge contacts

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx8 1.35V server RAM

SKU CH-B6PM-5DHVZ

8GB DDR3L 1333MHz ECC registered server DIMM with 2Rx8 organisation and 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V voltage reduces power draw in DDR3L modules
  • 1333MHz speed delivers responsive throughput for DDR3L server workloads
  • CL9 latency keeps access times tight on DDR3L RDIMM
  • 2Rx8 organisation boosts memory density per DDR3L DIMM slot

8GB DDR3L 1333 ECC RDIMM Server Module

This 8GB registered DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 2Rx8 organisation and Micron chipset on a 240-pin DIMM form factor. The stick is designed as a direct replacement for several Micron part numbers in server and workstation platforms.

Suited for ECC Registered DDR3L Upgrades

Administrators expanding memory in systems that require registered ECC DDR3L at 1333MHz will find this module a direct fit. It is not for builds that need unbuffered DIMMs, standard 1.5V DDR3, higher frequencies, or capacities beyond 8GB per slot.

Registered ECC with 2Rx8 Organisation

The registered buffer and ECC functionality are the decisive attributes; the module will only work in platforms that explicitly support registered ECC DDR3L memory. Verify the motherboard or system documentation for RDIMM compatibility before purchasing.

Põhijooned

  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V voltage reduces power draw in DDR3L modules
  • 1333MHz speed delivers responsive throughput for DDR3L server workloads
  • CL9 latency keeps access times tight on DDR3L RDIMM
  • 2Rx8 organisation boosts memory density per DDR3L DIMM slot

Tehnilised andmed

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KDF1G72PDZ-1G4D1, MT18KDF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4D1, MT18KSF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4J2
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KDF1G72PDZ-1G4D1, MT18KDF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4D1, MT18KSF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4J2

Küsimused selle toote kohta

Does my server need a 240-pin DDR3L RDIMM slot to use this 1.35V module?

Yes, this is a 240-pin DDR3L registered DIMM that requires a DDR3L RDIMM slot and a platform supporting 1.35V operation.

Can I mix this 2Rx8 registered ECC stick with older unbuffered non-ECC DDR3 DIMMs?

No, registered ECC modules cannot be mixed with unbuffered non-ECC DIMMs; the memory controller must support registered ECC operation for this stick to function.

How can I verify the module is running at PC3L-10600 with ECC active after installation?

Enter the BIOS or use a system information tool to confirm the memory reports 1333 MHz speed, registered ECC mode enabled, and 1.35V voltage.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.