Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular 240-pin DDR3L DIMM with black chips and silver edge contacts

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx8 1.35V server RAM

SKU CH-B6PM-5DHVZ

8GB DDR3L 1333MHz ECC registered server DIMM with 2Rx8 organisation and 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V voltage reduces power draw in DDR3L modules
  • 1333MHz speed delivers responsive throughput for DDR3L server workloads
  • CL9 latency keeps access times tight on DDR3L RDIMM
  • 2Rx8 organisation boosts memory density per DDR3L DIMM slot

8GB DDR3L 1333 ECC RDIMM Server Module

This 8GB registered DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 2Rx8 organisation and Micron chipset on a 240-pin DIMM form factor. The stick is designed as a direct replacement for several Micron part numbers in server and workstation platforms.

Suited for ECC Registered DDR3L Upgrades

Administrators expanding memory in systems that require registered ECC DDR3L at 1333MHz will find this module a direct fit. It is not for builds that need unbuffered DIMMs, standard 1.5V DDR3, higher frequencies, or capacities beyond 8GB per slot.

Registered ECC with 2Rx8 Organisation

The registered buffer and ECC functionality are the decisive attributes; the module will only work in platforms that explicitly support registered ECC DDR3L memory. Verify the motherboard or system documentation for RDIMM compatibility before purchasing.

Istaknuto

  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V voltage reduces power draw in DDR3L modules
  • 1333MHz speed delivers responsive throughput for DDR3L server workloads
  • CL9 latency keeps access times tight on DDR3L RDIMM
  • 2Rx8 organisation boosts memory density per DDR3L DIMM slot

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KDF1G72PDZ-1G4D1, MT18KDF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4D1, MT18KSF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4J2
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KDF1G72PDZ-1G4D1, MT18KDF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4D1, MT18KSF1G72PDZ-1G4E1, MT18KSF1G72PDZ-1G4J2

Pitanja o ovom artiklu

Does my server need a 240-pin DDR3L RDIMM slot to use this 1.35V module?

Yes, this is a 240-pin DDR3L registered DIMM that requires a DDR3L RDIMM slot and a platform supporting 1.35V operation.

Can I mix this 2Rx8 registered ECC stick with older unbuffered non-ECC DDR3 DIMMs?

No, registered ECC modules cannot be mixed with unbuffered non-ECC DIMMs; the memory controller must support registered ECC operation for this stick to function.

How can I verify the module is running at PC3L-10600 with ECC active after installation?

Enter the BIOS or use a system information tool to confirm the memory reports 1333 MHz speed, registered ECC mode enabled, and 1.35V voltage.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.