NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
A-Tech
8GB DDR3L 1600MHz ECC registered DIMM with 1.35V low-voltage operation for server upgrades
This A-Tech module delivers 8GB of registered ECC memory for server and workstation platforms that require DDR3L 1600 operation. The single-rank 1Rx4 design uses major-brand chips at 1.35V low voltage. It serves as a direct replacement for several Samsung part numbers listed in the specifications.
The DDR3L 1600 standard tops out at PC3L-12800 bandwidth with a CL11 latency profile on a 240-pin interface. Registered buffering adds a clock cycle for command addressing, which stabilises large-capacity configurations but prevents use in consumer boards that accept only unbuffered modules. Voltage is fixed at 1.35V; the module will not negotiate higher DDR3 voltages.
Verify that your system expressly supports DDR3L registered ECC DIMMs at 1600 MHz and accepts 1Rx4 rank organisation. Confirm the motherboard or server manual lists 1.35V operation and 240-pin RDIMM slots. This module will not function in platforms limited to unbuffered non-ECC memory or those requiring a different DDR generation.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This single 8GB stick is a 1Rx4 registered DIMM running at DDR3L 1600 with 1.35V, matching the Samsung M393B1G70BH0-YK0 and related part numbers listed.
It indicates a 1600 MT/s data rate at 1.35V low voltage with CL11 timing, delivering the standard PC3L-12800 bandwidth for registered ECC server platforms.
The 240-pin registered DIMM form factor fits DDR3L server slots only; the registered buffer and ECC require a compatible chipset, and the 1.35V operation excludes standard 1.5V DDR3 slots.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?