NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
8GB DDR3L 1600MHz ECC registered DIMM with 1.35V low-voltage operation for server upgrades
This A-Tech module delivers 8GB of registered ECC memory for server and workstation platforms that require DDR3L 1600 operation. The single-rank 1Rx4 design uses major-brand chips at 1.35V low voltage. It serves as a direct replacement for several Samsung part numbers listed in the specifications.
The DDR3L 1600 standard tops out at PC3L-12800 bandwidth with a CL11 latency profile on a 240-pin interface. Registered buffering adds a clock cycle for command addressing, which stabilises large-capacity configurations but prevents use in consumer boards that accept only unbuffered modules. Voltage is fixed at 1.35V; the module will not negotiate higher DDR3 voltages.
Verify that your system expressly supports DDR3L registered ECC DIMMs at 1600 MHz and accepts 1Rx4 rank organisation. Confirm the motherboard or server manual lists 1.35V operation and 240-pin RDIMM slots. This module will not function in platforms limited to unbuffered non-ECC memory or those requiring a different DDR generation.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This single 8GB stick is a 1Rx4 registered DIMM running at DDR3L 1600 with 1.35V, matching the Samsung M393B1G70BH0-YK0 and related part numbers listed.
It indicates a 1600 MT/s data rate at 1.35V low voltage with CL11 timing, delivering the standard PC3L-12800 bandwidth for registered ECC server platforms.
The 240-pin registered DIMM form factor fits DDR3L server slots only; the registered buffer and ECC require a compatible chipset, and the 1.35V operation excludes standard 1.5V DDR3 slots.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?