Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular silver metal mining unit with four front fans and improved heatsink visible

AFRNDK

AFRNDK Antminer T17e 50TH/s 2750W Improved Heatsink mining hardware

SKU CH-7SF9-FHR90

SHA-256 Bitcoin miner delivering 50 TH/s at 2750 W with an improved heatsink, four fans and Ethernet connectivity

  • Crypto AlgorithmSHA-256 algorithm
  • Hashrate50T
  • Network ConnectionEthernet
  • Noise level80dB
  • Fan4
  • Power Consumption2750W
  • SHA-256 Bitcoin mining at 50 TH/s
  • 055 J/Gh power efficiency for lower running cost
  • Improved heatsink design aids thermal management
  • Four fans maintain 80 dB noise output
  • Ethernet interface with 12 V DC input

Antminer T17e 50 TH/s SHA-256 Miner

The AFRNDK Antminer T17e is a Bitmain-built SHA-256 Bitcoin miner delivering 50 TH/s at 2750 W with a power efficiency of 0.055 J/Gh. It connects via Ethernet and uses four fans to manage heat, producing 80 dB of noise. The unit measures 175 x 298 x 304 mm and ships in new condition with an improved heatsink.

Suited For Dedicated Mining Operations

This hardware suits operators with access to 220 V mains power and a location that tolerates 80 dB continuous noise. It requires an ambient temperature range of 5 to 45 °C and humidity of 5 to 95 %. Home or office environments without dedicated ventilation and industrial-grade electrical supply should look at quieter, lower-power alternatives.

Build Integration Requirements

The miner draws 12 V DC internally and includes its own power supply, so no separate PSU selection is needed. A single Ethernet cable provides network connectivity. The improved heatsink and four-fan array handle cooling within the stated temperature window, freeing the builder from sourcing additional active cooling. Ensure the rack or shelf accommodates the 175 x 298 x 304 mm footprint and the 220 V feed.

Põhijooned

  • SHA-256 Bitcoin mining at 50 TH/s
  • 055 J/Gh power efficiency for lower running cost
  • Improved heatsink design aids thermal management
  • Four fans maintain 80 dB noise output
  • Ethernet interface with 12 V DC input

Tehnilised andmed

BrandAntminer
ModelT17e
Crypto AlgorithmSHA-256 algorithm
Hashrate50T
Network ConnectionEthernet
Noise level80dB
Fan4
Power Consumption2750W
Power Efficiency0.055j/Gh

Küsimused selle toote kohta

What input voltage must my facility provide for the 220 V requirement?

The miner requires a 220 V supply; feeding it a lower voltage can damage the unit.

Will the 80 dB noise level and 12 V internal voltage work alongside older SHA-256 miners on the same rack?

Yes, it connects via Ethernet and operates at 5–45 °C, so it can share a rack with legacy SHA-256 units if your power and cooling handle the combined load.

How do I verify the 50 TH/s hashrate and 0.055 J/Gh efficiency after setup?

Check the miner’s dashboard for a reported hashrate near 50 TH/s and a power draw close to 2750 W; those figures confirm the expected efficiency.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.