Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver metal mining unit with four front fans and improved heatsink visible

AFRNDK

AFRNDK Antminer T17e 50TH/s 2750W Improved Heatsink mining hardware

SKU CH-7SF9-FHR90

SHA-256 Bitcoin miner delivering 50 TH/s at 2750 W with an improved heatsink, four fans and Ethernet connectivity

  • Crypto AlgorithmSHA-256 algorithm
  • Hashrate50T
  • Network ConnectionEthernet
  • Noise level80dB
  • Fan4
  • Power Consumption2750W
  • SHA-256 Bitcoin mining at 50 TH/s
  • 055 J/Gh power efficiency for lower running cost
  • Improved heatsink design aids thermal management
  • Four fans maintain 80 dB noise output
  • Ethernet interface with 12 V DC input

Antminer T17e 50 TH/s SHA-256 Miner

The AFRNDK Antminer T17e is a Bitmain-built SHA-256 Bitcoin miner delivering 50 TH/s at 2750 W with a power efficiency of 0.055 J/Gh. It connects via Ethernet and uses four fans to manage heat, producing 80 dB of noise. The unit measures 175 x 298 x 304 mm and ships in new condition with an improved heatsink.

Suited For Dedicated Mining Operations

This hardware suits operators with access to 220 V mains power and a location that tolerates 80 dB continuous noise. It requires an ambient temperature range of 5 to 45 °C and humidity of 5 to 95 %. Home or office environments without dedicated ventilation and industrial-grade electrical supply should look at quieter, lower-power alternatives.

Build Integration Requirements

The miner draws 12 V DC internally and includes its own power supply, so no separate PSU selection is needed. A single Ethernet cable provides network connectivity. The improved heatsink and four-fan array handle cooling within the stated temperature window, freeing the builder from sourcing additional active cooling. Ensure the rack or shelf accommodates the 175 x 298 x 304 mm footprint and the 220 V feed.

Helstu kostir

  • SHA-256 Bitcoin mining at 50 TH/s
  • 055 J/Gh power efficiency for lower running cost
  • Improved heatsink design aids thermal management
  • Four fans maintain 80 dB noise output
  • Ethernet interface with 12 V DC input

Tæknilýsing

BrandAntminer
ModelT17e
Crypto AlgorithmSHA-256 algorithm
Hashrate50T
Network ConnectionEthernet
Noise level80dB
Fan4
Power Consumption2750W
Power Efficiency0.055j/Gh

Spurningar um þessa vöru

What input voltage must my facility provide for the 220 V requirement?

The miner requires a 220 V supply; feeding it a lower voltage can damage the unit.

Will the 80 dB noise level and 12 V internal voltage work alongside older SHA-256 miners on the same rack?

Yes, it connects via Ethernet and operates at 5–45 °C, so it can share a rack with legacy SHA-256 units if your power and cooling handle the combined load.

How do I verify the 50 TH/s hashrate and 0.055 J/Gh efficiency after setup?

Check the miner’s dashboard for a reported hashrate near 50 TH/s and a power draw close to 2750 W; those figures confirm the expected efficiency.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.