Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Chrome 90-degree compression fitting for 16mm hard tube with G1/4 thread

Alphacool

Alphacool Eiszapfen 16mm 90° Compression Fitting G1/4 Chrome

SKU CH-H07M-72BFX

A 16 mm 90° rotatable compression fitting with G1/4 thread for acrylic or brass hard tubing in chrome finish

  • TypeFittings
  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Precision 90° Rotatable Fitting

The Alphacool Eiszapfen 16mm 90° compression fitting joins 16 mm hard tubing to any component with a G1/4 thread. Its rotatable design simplifies routing in tight custom loops while the chrome finish resists chipping. High-flow internals maintain coolant velocity through the bend.

For 16 mm Hard-Tube Builds

This fitting suits builders assembling rigid acrylic or brass loops who need a right-angle turn with rotational alignment. It is not for systems using soft tubing, different outer-diameter hard tubes or threads other than G1/4.

16 mm Hard-Tube Compatibility

The single specification that decides fit is the 16 mm hard-tube interface paired with a G1/4 thread. Only tubing with exactly that outside diameter will seal correctly in the compression nut.

Põhijooned

  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Tehnilised andmed

TypeFittings

Küsimused selle toote kohta

Should I pick the 16 mm or a different tube size for this 90° fitting?

This fitting is made for 16 mm outer-diameter acrylic or brass hard tubes; choose it only if your loop uses 16 mm tubing.

What does the 90° bend and rotatable thread do inside a real build?

The 90° angle lets you route tubing around tight corners without kinks, and the rotatable G1/4 base lets you clock the outlet to any orientation after tightening.

The fitting uses a G1/4 thread — what does that cap in practice?

G1/4 is the standard thread on 95% of water-cooling components, so it mates with almost any block, radiator, pump or reservoir port.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.