Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Chrome 90-degree compression fitting for 16mm hard tube with G1/4 thread

Alphacool

Alphacool Eiszapfen 16mm 90° Compression Fitting G1/4 Chrome

SKU CH-H07M-72BFX

A 16 mm 90° rotatable compression fitting with G1/4 thread for acrylic or brass hard tubing in chrome finish

  • TypeFittings
  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Precision 90° Rotatable Fitting

The Alphacool Eiszapfen 16mm 90° compression fitting joins 16 mm hard tubing to any component with a G1/4 thread. Its rotatable design simplifies routing in tight custom loops while the chrome finish resists chipping. High-flow internals maintain coolant velocity through the bend.

For 16 mm Hard-Tube Builds

This fitting suits builders assembling rigid acrylic or brass loops who need a right-angle turn with rotational alignment. It is not for systems using soft tubing, different outer-diameter hard tubes or threads other than G1/4.

16 mm Hard-Tube Compatibility

The single specification that decides fit is the 16 mm hard-tube interface paired with a G1/4 thread. Only tubing with exactly that outside diameter will seal correctly in the compression nut.

Puntos fuertes

  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Especificaciones

TypeFittings

Preguntas sobre este artículo

Should I pick the 16 mm or a different tube size for this 90° fitting?

This fitting is made for 16 mm outer-diameter acrylic or brass hard tubes; choose it only if your loop uses 16 mm tubing.

What does the 90° bend and rotatable thread do inside a real build?

The 90° angle lets you route tubing around tight corners without kinks, and the rotatable G1/4 base lets you clock the outlet to any orientation after tightening.

The fitting uses a G1/4 thread — what does that cap in practice?

G1/4 is the standard thread on 95% of water-cooling components, so it mates with almost any block, radiator, pump or reservoir port.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.