NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
ASRock Rack
Micro-ATX server motherboard supporting Intel Xeon E-2300 or 10th Gen Pentium CPUs with four DDR4 ECC slots, dual 10GbE and dual 1GbE LAN, eight SATA ports, plus two M.2 and three PCIe expansion slots
The ASRock Rack E3C256D4U-2L2T fits Micro-ATX chassis and accepts one LGA1200 processor from the Intel Xeon E-2300 or 10th Gen Pentium families. Four DDR4 DIMM slots support ECC or non-ECC UDIMM up to 32 GB each. Dual 10 GbE and dual 1 GbE ports handle segregated traffic without extra cards.
Under continuous throughput the primary x16 and x4 slots run at PCIe 4.0 speeds when a Xeon E-2300 CPU is installed, while 10th Gen Pentium processors limit the x16 slot to PCIe 3.0 and disable the x4 slot. The Aspeed AST2500 provides constant remote management video independent of the main GPU. Eight SATA 6 Gb/s ports with RAID 0, 1, 5, 10 maintain steady array performance during rebuilds.
Only Intel Xeon E-2300 and 10th Gen Pentium series CPUs listed in the vendor support list will operate on this board. Builders needing other socket types or newer processor generations must select a different motherboard.
| Brand | AsRock Rack |
|---|---|
| Model | E3C256D4U-2L2T |
| CPU Socket Type | Single Socket H5 (LGA1200) |
| CPU Type | Supports Intel Xeon E-2300 and 10th Gen Intel Pentium series processors |
| Number of Processor Support | 1 |
| North Bridge | Intel C256 |
| Number of DDR4 Slots | 4 DIMM slots (2DPC) |
| DDR4 Standard | Supported Type: Supports DDR4 288-pin ECC/non-ECC UDIMM Max. DIMM Frequency: ECC/non-ECC UDIMM: max. 3200*MHz *Up to DDR4 2666MHz when installing 10th Gen Intel Pentium Series Processors |
| Maximum Memory Supported | Max. Capacity per DIMM: ECC/non-ECC UDIMM: up to 32GB |
| PCI Express 4.0 x16 | SLOT6: PCIe4.0* x16 [CPU] *When installing 10th Gen Intel Pentium Series Processors, SLOT6 supports PCIe3.0 only and SLOT4 will not function |
| PCI Express x4 | SLOT4: PCIe4.0* x4 [CPU] |
| PCI Express x1 | SLOT7: PCIe3.0 x1 [PCH] |
| SATA | 8 x SATA 6.0Gb/s |
| SATA RAID | 0/1/5/10 |
| M.2 | 1 M-key* (PCIe3.0 x4 or SATA 6Gb/s); support 22110/2280/2260 form factor [PCH] 1 M-key (PCIe3.0 x4); support 2280/2260 form factor [PCH] *SATA0 will be disabled when M2_1 populated with SATA device |
| Onboard Video Chipset | Aspeed AST2500 |
| LAN Chipset | Intel X710-AT2: 2 RJ45 (10GbE) |
| LAN Speed | 10Gbps |
| Second LAN Chipset | Intel i210: 2 RJ45 (1GbE) |
| Second LAN Speed | 10/100/1000Mbps |
| Max LAN Speed | 10Gbps |
| Back I/O Ports | 1 DB15, 1 DB9, 4 Type-A (USB3.2 Gen1), 2 RJ45 (10GbE), 2 RJ45 (1GbE), 1 HDMI, 1 dedicated IPMI LAN port |
| Other Connectors | Internal Connector/Headers Auxiliary Panel Header: 1 (18-pin): chassis intrusion, system fault LED, LAN1/LAN2 activity LED, locate, SMBus System Panel: 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED Video output: 1 Speaker Header: 1 Buzzer: 1 Fan Header: 7 (4-pin) Thermal Sensor Header: 1 TPM Header: 1 (13-pin, SPI) SGPIO Header: 1 SMBus header: 1 PMB header: 1 IPMB Header: 1 Clear CMOS: 1 (contact pads) Front Lan LED Connector: 1 USB 3.2 (Gen1) Header: 1 (19-pin, 2 USB3.2 Gen1) USB 2.0 Header: 1 (9-pin, 2 USB2.0) NMI Header: 1 Power Connector: 1 (24-pin, A |
| Form Factor | Micro ATX |
| Dimensions (W x L) | 9.6" x 9.6" |
| Tarnekaal | 1.09 kg |
| Pakendi mõõtmed | 305 × 287 × 71 mm |
The Aspeed AST2500 is a low-power management controller; its draw is a small fraction of the board total, which is dominated by the installed Xeon E-2300 or Pentium processor and DDR4 memory population.
You need one Intel Xeon E-2300 or 10th Gen Pentium CPU plus at least one DDR4 288-pin ECC or non-ECC UDIMM up to 32 GB per slot.
With a 10th Gen Pentium the x16 slot runs at PCIe 3.0 speeds, so a PCIe 3.0 x8 card will function normally; the x4 slot is disabled in that configuration.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?