NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
ASRock Rack
Micro-ATX server motherboard supporting Intel Xeon E-2300 or 10th Gen Pentium CPUs with four DDR4 ECC slots, dual 10GbE and dual 1GbE LAN, eight SATA ports, plus two M.2 and three PCIe expansion slots
The ASRock Rack E3C256D4U-2L2T fits Micro-ATX chassis and accepts one LGA1200 processor from the Intel Xeon E-2300 or 10th Gen Pentium families. Four DDR4 DIMM slots support ECC or non-ECC UDIMM up to 32 GB each. Dual 10 GbE and dual 1 GbE ports handle segregated traffic without extra cards.
Under continuous throughput the primary x16 and x4 slots run at PCIe 4.0 speeds when a Xeon E-2300 CPU is installed, while 10th Gen Pentium processors limit the x16 slot to PCIe 3.0 and disable the x4 slot. The Aspeed AST2500 provides constant remote management video independent of the main GPU. Eight SATA 6 Gb/s ports with RAID 0, 1, 5, 10 maintain steady array performance during rebuilds.
Only Intel Xeon E-2300 and 10th Gen Pentium series CPUs listed in the vendor support list will operate on this board. Builders needing other socket types or newer processor generations must select a different motherboard.
| Brand | AsRock Rack |
|---|---|
| Model | E3C256D4U-2L2T |
| CPU Socket Type | Single Socket H5 (LGA1200) |
| CPU Type | Supports Intel Xeon E-2300 and 10th Gen Intel Pentium series processors |
| Number of Processor Support | 1 |
| North Bridge | Intel C256 |
| Number of DDR4 Slots | 4 DIMM slots (2DPC) |
| DDR4 Standard | Supported Type: Supports DDR4 288-pin ECC/non-ECC UDIMM Max. DIMM Frequency: ECC/non-ECC UDIMM: max. 3200*MHz *Up to DDR4 2666MHz when installing 10th Gen Intel Pentium Series Processors |
| Maximum Memory Supported | Max. Capacity per DIMM: ECC/non-ECC UDIMM: up to 32GB |
| PCI Express 4.0 x16 | SLOT6: PCIe4.0* x16 [CPU] *When installing 10th Gen Intel Pentium Series Processors, SLOT6 supports PCIe3.0 only and SLOT4 will not function |
| PCI Express x4 | SLOT4: PCIe4.0* x4 [CPU] |
| PCI Express x1 | SLOT7: PCIe3.0 x1 [PCH] |
| SATA | 8 x SATA 6.0Gb/s |
| SATA RAID | 0/1/5/10 |
| M.2 | 1 M-key* (PCIe3.0 x4 or SATA 6Gb/s); support 22110/2280/2260 form factor [PCH] 1 M-key (PCIe3.0 x4); support 2280/2260 form factor [PCH] *SATA0 will be disabled when M2_1 populated with SATA device |
| Onboard Video Chipset | Aspeed AST2500 |
| LAN Chipset | Intel X710-AT2: 2 RJ45 (10GbE) |
| LAN Speed | 10Gbps |
| Second LAN Chipset | Intel i210: 2 RJ45 (1GbE) |
| Second LAN Speed | 10/100/1000Mbps |
| Max LAN Speed | 10Gbps |
| Back I/O Ports | 1 DB15, 1 DB9, 4 Type-A (USB3.2 Gen1), 2 RJ45 (10GbE), 2 RJ45 (1GbE), 1 HDMI, 1 dedicated IPMI LAN port |
| Other Connectors | Internal Connector/Headers Auxiliary Panel Header: 1 (18-pin): chassis intrusion, system fault LED, LAN1/LAN2 activity LED, locate, SMBus System Panel: 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED Video output: 1 Speaker Header: 1 Buzzer: 1 Fan Header: 7 (4-pin) Thermal Sensor Header: 1 TPM Header: 1 (13-pin, SPI) SGPIO Header: 1 SMBus header: 1 PMB header: 1 IPMB Header: 1 Clear CMOS: 1 (contact pads) Front Lan LED Connector: 1 USB 3.2 (Gen1) Header: 1 (19-pin, 2 USB3.2 Gen1) USB 2.0 Header: 1 (9-pin, 2 USB2.0) NMI Header: 1 Power Connector: 1 (24-pin, A |
| Form Factor | Micro ATX |
| Dimensions (W x L) | 9.6" x 9.6" |
| Teža pošiljke | 1.09 kg |
| Velikost pošiljke | 305 × 287 × 71 mm |
The Aspeed AST2500 is a low-power management controller; its draw is a small fraction of the board total, which is dominated by the installed Xeon E-2300 or Pentium processor and DDR4 memory population.
You need one Intel Xeon E-2300 or 10th Gen Pentium CPU plus at least one DDR4 288-pin ECC or non-ECC UDIMM up to 32 GB per slot.
With a 10th Gen Pentium the x16 slot runs at PCIe 3.0 speeds, so a PCIe 3.0 x8 card will function normally; the x4 slot is disabled in that configuration.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?