Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
ASRock Challenger Pro RX 6600 XT graphics card with triple fans and metal backplate

ASRock

ASRock RX6600XT CLP 8GO graphics card

SKU CH-ZTYZ-MJC01 MPN RX6600XT CLP 8GO

Refurbished Radeon RX 6600 XT with 8GB GDDR6, boost to 2602 MHz, triple-fan cooler and PCIe 4.0

  • InterfacePCI Express 4.0
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 6000 Series
  • GPURadeon RX 6600 XT
  • ArchitectureRDNA 2
  • Core Clock2033 MHz
  • 8 GB GDDR6 memory enables smooth 1080p and 1440p gaming
  • Boost clock reaches 2602 MHz for higher frame rates
  • HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four displays
  • PCI Express 4.0 interface delivers full bandwidth on modern platforms
  • Triple-fan cooler with 0 dB silent mode keeps temperatures low

Challenger Pro 8GB 128-Bit GDDR6

The ASRock RX6600XT CLP 8GO is a refurbished graphics card built on the AMD RDNA 2 architecture. It delivers 2048 stream processors and an 8GB GDDR6 frame buffer across a 128-bit interface. PCI Express 4.0 connectivity supports modern platforms. The card targets 1080p gaming and multi-monitor productivity.

Upgrade From RX 6000 Series Entry

Moving up from an older RX 6000 series entry model or an earlier architecture card brings higher game and boost clocks of 2413 MHz and 2602 MHz. The jump is worth it when you need faster frame rates at 1080p or want HDMI 2.1 VRR and DisplayPort 1.4 with DSC for high-refresh displays. The triple-fan cooler and metal backplate help sustain those clocks.

Check PSU And Case Clearance

Verify your power supply meets the 500W recommendation and provides one 8-pin connector. Measure available length against the 303 mm maximum GPU length and confirm the 2.25-slot width fits your motherboard spacing. The card occupies two expansion brackets and requires adequate case airflow for the triple-fan design.

Põhijooned

  • 8 GB GDDR6 memory enables smooth 1080p and 1440p gaming
  • Boost clock reaches 2602 MHz for higher frame rates
  • HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four displays
  • PCI Express 4.0 interface delivers full bandwidth on modern platforms
  • Triple-fan cooler with 0 dB silent mode keeps temperatures low

Tehnilised andmed

BrandASRock
SeriesChallenger Pro
ModelRX6600XT CLP 8GO
InterfacePCI Express 4.0
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 6000 Series
GPURadeon RX 6600 XT
ArchitectureRDNA 2
Core Clock2033 MHz
Game Clock2413 MHz
Boost Clock2602 MHz
Stream Processors2048
Memory Size8GB
Memory Interface128-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1 VRR
DisplayPort3 x DisplayPort 1.4 with DSC
Max Resolution7680 x 4320
CoolerTriple Fans
Recommended PSU Wattage500W
Power Connector1 x 8-Pin
HDCP ReadyYes
FeaturesTriple Fan Design
Stylish Metal Backplate
Striped Axial Fan
Ultra-fit Heatpipe
0dB Silent Cooling
Super Alloy Graphics Card
Max GPU Length303 mm
Card Dimensions (L x H)11.93" x 5.16"
Slot Width2.25-slot
Tarnekaal1.18 kg
Pakendi mõõtmed394 × 229 × 113 mm

Küsimused selle toote kohta

How much case length does the 303 mm triple-fan card need?

The card measures 303 mm long, so the chassis must provide at least that much clearance from the motherboard slot to the front panel or drive cage.

Which power connector must be seated before the 500 W PSU can deliver stable current?

A single 8-pin PCIe power plug is required; the common mistake is leaving the latch unclicked, which causes intermittent power under load.

When should the three striped axial fans and heatpipes be cleaned to keep 0 dB silent cooling effective?

Dust the fan blades and fin stack every 6 to 12 months with compressed air; heavy buildup raises fan speed and breaks the zero-RPM idle mode.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.