Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
ASRock Challenger Pro RX 6600 XT graphics card with triple fans and metal backplate

ASRock

ASRock RX6600XT CLP 8GO graphics card

SKU CH-ZTYZ-MJC01 MPN RX6600XT CLP 8GO

Refurbished Radeon RX 6600 XT with 8GB GDDR6, boost to 2602 MHz, triple-fan cooler and PCIe 4.0

  • InterfacePCI Express 4.0
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 6000 Series
  • GPURadeon RX 6600 XT
  • ArchitectureRDNA 2
  • Core Clock2033 MHz
  • 8 GB GDDR6 memory enables smooth 1080p and 1440p gaming
  • Boost clock reaches 2602 MHz for higher frame rates
  • HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four displays
  • PCI Express 4.0 interface delivers full bandwidth on modern platforms
  • Triple-fan cooler with 0 dB silent mode keeps temperatures low

Challenger Pro 8GB 128-Bit GDDR6

The ASRock RX6600XT CLP 8GO is a refurbished graphics card built on the AMD RDNA 2 architecture. It delivers 2048 stream processors and an 8GB GDDR6 frame buffer across a 128-bit interface. PCI Express 4.0 connectivity supports modern platforms. The card targets 1080p gaming and multi-monitor productivity.

Upgrade From RX 6000 Series Entry

Moving up from an older RX 6000 series entry model or an earlier architecture card brings higher game and boost clocks of 2413 MHz and 2602 MHz. The jump is worth it when you need faster frame rates at 1080p or want HDMI 2.1 VRR and DisplayPort 1.4 with DSC for high-refresh displays. The triple-fan cooler and metal backplate help sustain those clocks.

Check PSU And Case Clearance

Verify your power supply meets the 500W recommendation and provides one 8-pin connector. Measure available length against the 303 mm maximum GPU length and confirm the 2.25-slot width fits your motherboard spacing. The card occupies two expansion brackets and requires adequate case airflow for the triple-fan design.

Priekšrocības

  • 8 GB GDDR6 memory enables smooth 1080p and 1440p gaming
  • Boost clock reaches 2602 MHz for higher frame rates
  • HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four displays
  • PCI Express 4.0 interface delivers full bandwidth on modern platforms
  • Triple-fan cooler with 0 dB silent mode keeps temperatures low

Specifikācijas

BrandASRock
SeriesChallenger Pro
ModelRX6600XT CLP 8GO
InterfacePCI Express 4.0
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 6000 Series
GPURadeon RX 6600 XT
ArchitectureRDNA 2
Core Clock2033 MHz
Game Clock2413 MHz
Boost Clock2602 MHz
Stream Processors2048
Memory Size8GB
Memory Interface128-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1 VRR
DisplayPort3 x DisplayPort 1.4 with DSC
Max Resolution7680 x 4320
CoolerTriple Fans
Recommended PSU Wattage500W
Power Connector1 x 8-Pin
HDCP ReadyYes
FeaturesTriple Fan Design
Stylish Metal Backplate
Striped Axial Fan
Ultra-fit Heatpipe
0dB Silent Cooling
Super Alloy Graphics Card
Max GPU Length303 mm
Card Dimensions (L x H)11.93" x 5.16"
Slot Width2.25-slot
Sūtījuma svars1.18 kg
Sūtījuma izmēri394 × 229 × 113 mm

Jautājumi par šo preci

How much case length does the 303 mm triple-fan card need?

The card measures 303 mm long, so the chassis must provide at least that much clearance from the motherboard slot to the front panel or drive cage.

Which power connector must be seated before the 500 W PSU can deliver stable current?

A single 8-pin PCIe power plug is required; the common mistake is leaving the latch unclicked, which causes intermittent power under load.

When should the three striped axial fans and heatpipes be cleaned to keep 0 dB silent cooling effective?

Dust the fan blades and fin stack every 6 to 12 months with compressed air; heavy buildup raises fan speed and breaks the zero-RPM idle mode.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.