Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Compact orange 3D printed stand with OLED screen and built in fan

Bitaxe

Bitaxe NerdOCTaxe Rev3.1 12 TH/s mining hardware

SKU CH-RFDX-023QD

A compact open-source ASIC solo miner delivering 12 TH/s at 200 W with BM1370 chip, 2.4 GHz Wi-Fi, AxeOS firmware, and a 0.91" OLED display

  • TypeMining Power Supply
  • Crypto AlgorithmBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky
  • Compatible CurrencyWrapped Bitcoin (WBTC)
  • Mining HardwareBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky
  • HashrateBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky
  • Network ConnectionBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky
  • 12 TH/s hashrate powered by BM1370 ASIC chip
  • 200 W total power draw at 1516 J/TH efficiency
  • 4 GHz Wi-Fi and AxeOS for remote monitoring
  • 91" OLED shows real-time stats instantly
  • Active air cooling with brushless fan for quiet operation

Solo Bitcoin ASIC Miner

The Bitaxe NerdOCTaxe Rev3.1 is a compact open-source ASIC solo miner designed for home or office Bitcoin mining. It uses the BM1370 chip to deliver a hashrate of 12 TH/s while drawing 200W of power. The device supports the SHA256 algorithm and connects via 2.4GHz Wi-Fi. A built-in 0.91 inch OLED display shows real-time statistics.

Efficiency and Hashrate

The single specification that determines suitability is the energy efficiency of 1516 J/TH at 12 TH/s. This figure directly governs daily electricity cost versus the probability of solving a block. Buyers should compare this efficiency against their local power rate before purchasing.

Setup and Common Issues

Initial setup requires only mains power and a 2.4GHz Wi-Fi network; the AxeOS firmware configures mining parameters automatically. The most frequent issue is unstable 2.4GHz connectivity causing dropped shares. The solder-free modular design allows the BM1370 hash board to be swapped without special tools if a chip fails.

Põhijooned

  • 12 TH/s hashrate powered by BM1370 ASIC chip
  • 200 W total power draw at 1516 J/TH efficiency
  • 4 GHz Wi-Fi and AxeOS for remote monitoring
  • 91" OLED shows real-time stats instantly
  • Active air cooling with brushless fan for quiet operation

Tehnilised andmed

Model12T
TypeMining Power Supply
Crypto AlgorithmBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky Crypto Lottery Miner with Open-Source System, 200W Low Power Home Solo ASIC Miner Bitcoin ASIC Solo Miner, BM1370 Chip, 2.4G Wi-Fi, AxeOS
Compatible CurrencyWrapped Bitcoin (WBTC)
Mining HardwareBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky Crypto Lottery Miner with Open-Source System, 200W Low Power Home Solo ASIC Miner Bitcoin ASIC Solo Miner, BM1370 Chip, 2.4G Wi-Fi, AxeOS
HashrateBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky Crypto Lottery Miner with Open-Source System, 200W Low Power Home Solo ASIC Miner Bitcoin ASIC Solo Miner, BM1370 Chip, 2.4G Wi-Fi, AxeOS
Network ConnectionBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky Crypto Lottery Miner with Open-Source System, 200W Low Power Home Solo ASIC Miner Bitcoin ASIC Solo Miner, BM1370 Chip, 2.4G Wi-Fi, AxeOS
FanBuilt-in High-speed Brushless Fan
Dimension14.33in W x 12.83in H x 9.06in D
Weight0.5 pounds
FeatureBitcoins Miner NerdOCTaxe ? Rev3.1 ASIC Miner, 12TH/S Lucky Crypto Lottery Miner with Open-Source System, 200W Low Power Home Solo ASIC Miner Bitcoin ASIC Solo Miner, BM1370 Chip, 2.4G Wi-Fi, AxeOS, 1

Küsimused selle toote kohta

What power input does the miner need?

The unit draws 200 W and connects via USB, so a standard USB power source rated for that wattage is required.

Does the built-in Wi-Fi work with 5 GHz networks?

The wireless module operates on 2.4 GHz only, so a 2.4 GHz access point or router band is needed.

How much space should I allow for the device and its stand?

The miner measures 14.33 in wide, 12.83 in high and 9.06 in deep, and the orange 3D-printed stand fits within that footprint.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.