Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 16GB DDR4-2400 ECC UDIMM CX1KM

SKU CH-8V8X-TSMM2

16 GB DDR4-2400 ECC UDIMM with CL15 latency, 1.2 V operation and 2Rx8 organisation for Dell-compatible servers

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 16 GB DDR4-2400 ECC UDIMM expands server memory capacity
  • CL15 latency at 1.2 V delivers responsive error-corrected performance
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell CX1KM compatibility validated for drop-in upgrades
  • Lifetime warranty backed by 100 % tested and validated modules

Dell-compatible 16 GB ECC UDIMM

This Brute Networks module is a 16 GB DDR4-2400 ECC UDIMM built to match Dell part number CX1KM. It runs at 1.20 V with a CAS latency of CL15 and uses a 2Rx8 organisation. Major-brand Samsung, SK Hynix or Micron chips are used throughout. The stick is validated for Dell systems that accept unbuffered ECC memory.

Upgrade from non-ECC or smaller DDR4

Replacing standard non-ECC DIMMs with this module adds single-bit error correction for data integrity in server workloads. Moving up from 8 GB sticks doubles capacity per slot without changing voltage or speed. The jump is worth it when the platform supports ECC UDIMMs and the workload demands error detection at 2400 MT/s.

Fits Dell servers with UDIMM slots

The module plugs directly into any Dell platform that lists CX1KM as a supported part and provides UDIMM slots wired for 1.20 V DDR4-2400. It frees budget compared with OEM-labelled modules while keeping the same chip suppliers and electrical specifications. Systems requiring registered or load-reduced DIMMs cannot use this unbuffered design.

Põhijooned

  • 16 GB DDR4-2400 ECC UDIMM expands server memory capacity
  • CL15 latency at 1.2 V delivers responsive error-corrected performance
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell CX1KM compatibility validated for drop-in upgrades
  • Lifetime warranty backed by 100 % tested and validated modules

Tehnilised andmed

BrandDell
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Küsimused selle toote kohta

Does the 16GB DDR4-2400 UDIMM require a standard 288-pin DDR4 slot?

Yes, this is a standard DDR4 UDIMM that fits any desktop or server board with a 288-pin DDR4 DIMM socket running at 1.2V.

What is the correct way to seat the module so the ECC function initialises?

Align the notch with the slot key, press straight down until both retention clips click, then verify in BIOS that 16GB at 2400MHz CL15 is detected with ECC enabled.

Will the major-brand DRAM chips (Samsung, SK Hynix or Micron) need replacement within the lifetime warranty period?

The modules are 100% tested and carry a lifetime warranty; under normal server workloads no replacement is expected, but Brute Networks will swap any defective stick at no cost.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.