Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

Brute Networks

Brute Networks 16GB DDR4-2400 ECC UDIMM CX1KM

SKU CH-8V8X-TSMM2

16 GB DDR4-2400 ECC UDIMM with CL15 latency, 1.2 V operation and 2Rx8 organisation for Dell-compatible servers

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 16 GB DDR4-2400 ECC UDIMM expands server memory capacity
  • CL15 latency at 1.2 V delivers responsive error-corrected performance
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell CX1KM compatibility validated for drop-in upgrades
  • Lifetime warranty backed by 100 % tested and validated modules

Dell-compatible 16 GB ECC UDIMM

This Brute Networks module is a 16 GB DDR4-2400 ECC UDIMM built to match Dell part number CX1KM. It runs at 1.20 V with a CAS latency of CL15 and uses a 2Rx8 organisation. Major-brand Samsung, SK Hynix or Micron chips are used throughout. The stick is validated for Dell systems that accept unbuffered ECC memory.

Upgrade from non-ECC or smaller DDR4

Replacing standard non-ECC DIMMs with this module adds single-bit error correction for data integrity in server workloads. Moving up from 8 GB sticks doubles capacity per slot without changing voltage or speed. The jump is worth it when the platform supports ECC UDIMMs and the workload demands error detection at 2400 MT/s.

Fits Dell servers with UDIMM slots

The module plugs directly into any Dell platform that lists CX1KM as a supported part and provides UDIMM slots wired for 1.20 V DDR4-2400. It frees budget compared with OEM-labelled modules while keeping the same chip suppliers and electrical specifications. Systems requiring registered or load-reduced DIMMs cannot use this unbuffered design.

Prednosti

  • 16 GB DDR4-2400 ECC UDIMM expands server memory capacity
  • CL15 latency at 1.2 V delivers responsive error-corrected performance
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
  • 100 % Dell CX1KM compatibility validated for drop-in upgrades
  • Lifetime warranty backed by 100 % tested and validated modules

Špecifikácie

BrandDell
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Otázky k tomuto produktu

Does the 16GB DDR4-2400 UDIMM require a standard 288-pin DDR4 slot?

Yes, this is a standard DDR4 UDIMM that fits any desktop or server board with a 288-pin DDR4 DIMM socket running at 1.2V.

What is the correct way to seat the module so the ECC function initialises?

Align the notch with the slot key, press straight down until both retention clips click, then verify in BIOS that 16GB at 2400MHz CL15 is detected with ECC enabled.

Will the major-brand DRAM chips (Samsung, SK Hynix or Micron) need replacement within the lifetime warranty period?

The modules are 100% tested and carry a lifetime warranty; under normal server workloads no replacement is expected, but Brute Networks will swap any defective stick at no cost.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.