SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501067BTC
Laos
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz ECC Unregistered DIMM - B89
16 GB DDR3 kit with ECC, 1600 MHz CL11, for Supermicro X10SLL-series boards
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- ECC protection guards data integrity on critical workloads
- 1600 MHz DDR3 speed matches Supermicro X10SLL motherboard specs
- 16 GB dual-channel kit (2 × 8 GB) fills two slots for balanced bandwidth
- 5 V operation keeps power draw low for stable server uptime
- 240-pin unregistered DIMMs install directly in supported Supermicro boards
Compatible Supermicro DDR3 Kit
This 16GB kit contains two 8GB DDR3 ECC unregistered DIMMs validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets administrators upgrading or repairing those specific platforms with guaranteed compatibility. Builders using other boards or requiring registered modules should look elsewhere.
240-Pin Unbuffered Build
Each module uses a standard 240-pin DDR3 interface and operates at 1.5V without a heat spreader unless current inventory includes one. The unbuffered design connects directly to the memory controller, so signal integrity depends on the board layout of the supported Supermicro models. Mixing with registered DIMMs is not supported on these platforms.
CL11 DDR3-1600 Thermals
Rated at DDR3-1600 with CL11 11-11-11 timings, the kit draws 1.5V under normal load. Without a guaranteed spreader, airflow across the sticks relies on the chassis and CPU cooler. ECC operation adds minimal overhead while providing error correction for data integrity in server workloads.
Põhijooned
- ECC protection guards data integrity on critical workloads
- 1600 MHz DDR3 speed matches Supermicro X10SLL motherboard specs
- 16 GB dual-channel kit (2 × 8 GB) fills two slots for balanced bandwidth
- 5 V operation keeps power draw low for stable server uptime
- 240-pin unregistered DIMMs install directly in supported Supermicro boards
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247212800ECCNRDIMM2R8 |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Supermicro X10SLL-F, X10SLL+-F, X10SLH-F Motherboard |
| Package Content | 2 Memory RAM Sticks |
Küsimused selle toote kohta
What speed does the DDR3 1600 (PC3 12800) interface cap at in practice?
The modules run at 1600 MHz with a PC3 12800 data rate, limited by the Supermicro motherboard's memory controller.
What physical slot and clearance do these 240-pin DIMMs need to fit?
They require four 240-pin DDR3 DIMM sockets; each stick is a standard-height unregistered DIMM with no extra heat spreader unless inventory changes.
How are the two 8 GB sticks installed, and what step do builders often miss?
Populate the motherboard's four slots in the recommended channel order, then enable ECC in the BIOS so the error-correction feature actually activates.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
