暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3 DIMM sticks in anti-static tray

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz ECC Unregistered DIMM - B89

SKU CH-XJ9J-HTZRJ

16 GB DDR3 kit with ECC, 1600 MHz CL11, for Supermicro X10SLL-series boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • ECC protection guards data integrity on critical workloads
  • 1600 MHz DDR3 speed matches Supermicro X10SLL motherboard specs
  • 16 GB dual-channel kit (2 × 8 GB) fills two slots for balanced bandwidth
  • 5 V operation keeps power draw low for stable server uptime
  • 240-pin unregistered DIMMs install directly in supported Supermicro boards

Compatible Supermicro DDR3 Kit

This 16GB kit contains two 8GB DDR3 ECC unregistered DIMMs validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets administrators upgrading or repairing those specific platforms with guaranteed compatibility. Builders using other boards or requiring registered modules should look elsewhere.

240-Pin Unbuffered Build

Each module uses a standard 240-pin DDR3 interface and operates at 1.5V without a heat spreader unless current inventory includes one. The unbuffered design connects directly to the memory controller, so signal integrity depends on the board layout of the supported Supermicro models. Mixing with registered DIMMs is not supported on these platforms.

CL11 DDR3-1600 Thermals

Rated at DDR3-1600 with CL11 11-11-11 timings, the kit draws 1.5V under normal load. Without a guaranteed spreader, airflow across the sticks relies on the chassis and CPU cooler. ECC operation adds minimal overhead while providing error correction for data integrity in server workloads.

特長

  • ECC protection guards data integrity on critical workloads
  • 1600 MHz DDR3 speed matches Supermicro X10SLL motherboard specs
  • 16 GB dual-channel kit (2 × 8 GB) fills two slots for balanced bandwidth
  • 5 V operation keeps power draw low for stable server uptime
  • 240-pin unregistered DIMMs install directly in supported Supermicro boards

仕様

BrandComputer Memory Solutions
ModelCM10247212800ECCNRDIMM2R8
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X10SLL-F, X10SLL+-F, X10SLH-F Motherboard
Package Content2 Memory RAM Sticks

この商品に関する質問

What speed does the DDR3 1600 (PC3 12800) interface cap at in practice?

The modules run at 1600 MHz with a PC3 12800 data rate, limited by the Supermicro motherboard's memory controller.

What physical slot and clearance do these 240-pin DIMMs need to fit?

They require four 240-pin DDR3 DIMM sockets; each stick is a standard-height unregistered DIMM with no extra heat spreader unless inventory changes.

How are the two 8 GB sticks installed, and what step do builders often miss?

Populate the motherboard's four slots in the recommended channel order, then enable ECC in the BIOS so the error-correction feature actually activates.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。