SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501555BTC
Laos
Computer Memory Solutions
Computer Memory Solutions CM128642700SO 1GB DDR1 333MHz SODIMM for Panasonic Toughbook 29 memory upgrade
1GB DDR1 333MHz SODIMM module upgrades Panasonic Toughbook 29 laptops with CL2.5 timing
- Capacity1GB
- Type200-Pin DDR SO-DIMM
- SpeedDDR 333 (PC 2700)
- CAS LatencyCL2.5
- Timing2.5-3-3
- Voltage2.5V
- 1GB capacity extends Toughbook 29 multitasking headroom
- DDR333 speed matches original system timing
- 200-pin SODIMM fits CF-29 series slots directly
- 5V operation meets factory voltage spec
- CL2.5 latency supports stable legacy performance
Panasonic Toughbook 29 memory upgrade
This 1GB DDR1 333MHz SODIMM is built for Panasonic Toughbook 29 models including Cf-29, Cf-29C, Cf-29E, Cf-29H and Cf-29J. It installs in a 200-pin slot and runs at 2.5V with CL2.5 timing. The module is unbuffered, non-ECC and uses a 2Rx8 rank configuration. It suits technicians restoring or maintaining these legacy rugged laptops.
Suits legacy Toughbook 29 servicing.
The part matches the exact voltage, pin count and speed the Toughbook 29 expects, so it fits maintenance workflows for that chassis. It is not for laptops that require a different pin layout, a higher voltage or a faster DDR specification. Buyers who need more than 1GB per module or a dual-channel kit should look at other system-specific upgrades.
200-pin DDR1 333MHz SODIMM decides fit
The 200-pin DDR1 333MHz SODIMM form factor is the single specification that determines whether this module will seat and post in the target machine. If the service manual calls for PC2700 unbuffered memory at 2.5V with CL2.5 timing, this stick meets that requirement. If the platform calls for any other pin count, voltage or generation, it will not work.
Põhijooned
- 1GB capacity extends Toughbook 29 multitasking headroom
- DDR333 speed matches original system timing
- 200-pin SODIMM fits CF-29 series slots directly
- 5V operation meets factory voltage spec
- CL2.5 latency supports stable legacy performance
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM128642700SO |
| Capacity | 1GB |
| Type | 200-Pin DDR SO-DIMM |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Timing | 2.5-3-3 |
| Voltage | 2.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Panasonic Toughbook 29 (Cf-29, Cf-29C, Cf-29E, Cf-29H, Cf-29J |
| Package Content | 1 Memory RAM Stick |
Küsimused selle toote kohta
Will this CM128642700SO module work in a Toughbook 29 that already has a DDR1 SODIMM installed?
The module is a 200-pin DDR333 SODIMM rated at 2.5 V and CL2.5 timing, matching the Toughbook 29 specification. Both sockets accept PC2700 DDR1 memory, so it will install alongside an existing stick.
How can I verify the CM128642700SO is running at the correct speed after installation?
The BIOS or a system-information tool will show the memory operating at DDR333 (PC2700) with CL2.5-3-3 timings at 2.5 V, confirming the module is recognised and configured properly.
What comes in the package and is anything else required for the upgrade?
The box contains one 1 GB CM128642700SO SODIMM. No additional parts, cables or tools are needed to install it in a compatible Toughbook 29.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
