我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM memory module with black chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions CM128642700SO 1GB DDR1 333MHz SODIMM for Panasonic Toughbook 29 memory upgrade

SKU CH-VBHK-Y9DJC

1GB DDR1 333MHz SODIMM module upgrades Panasonic Toughbook 29 laptops with CL2.5 timing

  • Capacity1GB
  • Type200-Pin DDR SO-DIMM
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing2.5-3-3
  • Voltage2.5V
  • 1GB capacity extends Toughbook 29 multitasking headroom
  • DDR333 speed matches original system timing
  • 200-pin SODIMM fits CF-29 series slots directly
  • 5V operation meets factory voltage spec
  • CL2.5 latency supports stable legacy performance

Panasonic Toughbook 29 memory upgrade

This 1GB DDR1 333MHz SODIMM is built for Panasonic Toughbook 29 models including Cf-29, Cf-29C, Cf-29E, Cf-29H and Cf-29J. It installs in a 200-pin slot and runs at 2.5V with CL2.5 timing. The module is unbuffered, non-ECC and uses a 2Rx8 rank configuration. It suits technicians restoring or maintaining these legacy rugged laptops.

Suits legacy Toughbook 29 servicing.

The part matches the exact voltage, pin count and speed the Toughbook 29 expects, so it fits maintenance workflows for that chassis. It is not for laptops that require a different pin layout, a higher voltage or a faster DDR specification. Buyers who need more than 1GB per module or a dual-channel kit should look at other system-specific upgrades.

200-pin DDR1 333MHz SODIMM decides fit

The 200-pin DDR1 333MHz SODIMM form factor is the single specification that determines whether this module will seat and post in the target machine. If the service manual calls for PC2700 unbuffered memory at 2.5V with CL2.5 timing, this stick meets that requirement. If the platform calls for any other pin count, voltage or generation, it will not work.

商品特色

  • 1GB capacity extends Toughbook 29 multitasking headroom
  • DDR333 speed matches original system timing
  • 200-pin SODIMM fits CF-29 series slots directly
  • 5V operation meets factory voltage spec
  • CL2.5 latency supports stable legacy performance

商品規格

BrandComputer Memory Solutions
ModelCM128642700SO
Capacity1GB
Type200-Pin DDR SO-DIMM
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing2.5-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemPanasonic Toughbook 29 (Cf-29, Cf-29C, Cf-29E, Cf-29H, Cf-29J
Package Content1 Memory RAM Stick

商品問答

Will this CM128642700SO module work in a Toughbook 29 that already has a DDR1 SODIMM installed?

The module is a 200-pin DDR333 SODIMM rated at 2.5 V and CL2.5 timing, matching the Toughbook 29 specification. Both sockets accept PC2700 DDR1 memory, so it will install alongside an existing stick.

How can I verify the CM128642700SO is running at the correct speed after installation?

The BIOS or a system-information tool will show the memory operating at DDR333 (PC2700) with CL2.5-3-3 timings at 2.5 V, confirming the module is recognised and configured properly.

What comes in the package and is anything else required for the upgrade?

The box contains one 1 GB CM128642700SO SODIMM. No additional parts, cables or tools are needed to install it in a compatible Toughbook 29.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。