BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276664BTC
Laos
Corsair
Corsair Vengeance LPX CMK64GX4M4D3600C18 64GB (4×16GB) DDR4 3600 CL18 desktop RAM
A 64GB kit of four 16GB DDR4 3600 CL18 modules with a low 34mm profile, aluminum heatspreaders and Intel XMP 2.0 support
- Capacity64GB (4 x 16GB)
- Type288-Pin PC RAM
- SpeedDDR4 3600 (PC4 28800)
- CAS LatencyCL18
- Timing18-22-22-42
- Voltage1.35V
- 64GB total capacity for demanding workloads using four 16GB modules
- 3600MHz DDR4 speed with CL18 timing for responsive performance
- Low-profile 34mm height fits small-form-factor builds and large coolers
- Anodized aluminum heatspreader dissipates heat for sustained high clocks
- Intel XMP 2.0 support enables one-click setup in BIOS
Capacity and kit layout
This kit delivers 64GB of DDR4 memory across four 16GB modules, giving a full four-channel population for desktop platforms that support it. The 288-pin form factor fits standard consumer motherboards and the black anodized aluminum heatspreader keeps the modules low enough for most small-form-factor builds at 34mm tall.
DDR4 3600 practical limits
The memory runs at DDR4 3600 (PC4 28800) with a rated voltage of 1.35V and timings of 18-22-22-42, which is the highest JEDEC-defined speed tier for DDR4 before overclocking headroom begins. Intel XMP 2.0 support allows the rated profile to be applied with a single BIOS setting, but stability at this frequency still depends on the memory controller quality of the specific CPU and the motherboard topology.
CAS latency as the deciding spec
The CL18 CAS latency is the single figure that determines whether this kit matches the latency budget of a given workload; lower latency at the same frequency yields snappier response in latency-sensitive tasks, while higher latency may be acceptable for throughput-oriented applications. Hand-sorted chips and a high-performance PCB provide overclocking headroom, but the rated CL18 at 3600MT/s remains the baseline specification to evaluate against system requirements.
Põhijooned
- 64GB total capacity for demanding workloads using four 16GB modules
- 3600MHz DDR4 speed with CL18 timing for responsive performance
- Low-profile 34mm height fits small-form-factor builds and large coolers
- Anodized aluminum heatspreader dissipates heat for sustained high clocks
- Intel XMP 2.0 support enables one-click setup in BIOS
Tehnilised andmed
| Brand | CORSAIR |
|---|---|
| Series | Vengeance LPX |
| Model | CMK64GX4M4D3600C18 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Hand-sorted memory chips ensure high performance with generous overclocking headroom. VENGEANCE LPX is optimized for wide compatibility with the latest Intel and AMD DDR4 motherboards. A low-profile height of just 34mm ensures that VENGEANCE LPX even fits in most small-form-factor builds. A high-performance PCB guarantees strong signal quality and stability for superior overclocking ability. A solid aluminum heatspreader efficiently dissipates heat from each module so that they consistently run at high clock speeds. Supports Intel XMP 2.0 for simple one-setting installation and setup |
| Recommend Use | AMD 400 Series / AMD 500 Series / Intel 300 Series / Intel 400 Series |
| Tarnekaal | 0.20 kg |
| Pakendi mõõtmed | 154 × 90 × 20 mm |
Küsimused selle toote kohta
Will the 34mm module height clear my large CPU air cooler?
The low-profile 34mm height is designed to fit under most large air coolers and in small-form-factor cases, leaving ample clearance for typical heatsink overhang.
Does this kit run at 3600 MT/s automatically or do I need to enable a profile?
The modules default to standard JEDEC speeds; enabling the Intel XMP 2.0 profile in the BIOS sets the rated 3600 MT/s, CL18-22-22-42 timings and 1.35 V with a single selection.
Can I populate all four slots on a board that only supports two modules per channel?
This is a matched 4×16 GB kit tested to run together at the rated speed; installing all four modules fills two slots per channel on mainstream dual-channel platforms.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
