DELL
DELL 341-9629 600GB 15000 RPM SAS 3.5" internal hard drive
A 600 GB 3.5-inch SAS hard drive spinning at 15,000 RPM for server workloads
- PackagingBare Drive
- InterfaceSerial Attached SCSI
- Capacity600GB
- RPM15000 RPM
- Average Latency12Gb/s
- UsageIdeal for Servers
- 600GB capacity stores large server workloads
- 15000 RPM spindle speed cuts data access latency
- SAS interface delivers 12Gb/s transfer rate
- 5 inch form factor fits standard server bays
- New condition ensures full manufacturer reliability
Enterprise 600 GB SAS drive
This Dell 341-9629 is a 3.5 inch internal hard drive with a 600 GB capacity and a 15000 RPM spindle speed. It connects through a SAS interface rated at 12 Gb/s average latency. The unit is supplied as a bare drive in new condition.
Suited for high-throughput server workloads
The 15K rotation speed makes this drive suitable for transactional databases, virtualization hosts and other I/O intensive server roles. It is not intended for desktop PCs or consumer NAS units that lack SAS backplanes or controllers. Buyers who need larger capacities or lower power draw should consider alternative storage types.
15000 RPM spindle speed
The 15000 RPM specification is the primary factor that determines whether this drive meets the performance envelope of the target server application. Verify that the host system supports 3.5 inch SAS drives and provides adequate cooling for 15K operation before purchase.
Põhijooned
- 600GB capacity stores large server workloads
- 15000 RPM spindle speed cuts data access latency
- SAS interface delivers 12Gb/s transfer rate
- 5 inch form factor fits standard server bays
- New condition ensures full manufacturer reliability
Tehnilised andmed
| Brand | Dell |
|---|---|
| Model | 341-9629 |
| Packaging | Bare Drive |
| Interface | Serial Attached SCSI |
| Capacity | 600GB |
| RPM | 15000 RPM |
| Average Latency | 12Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Tarnekaal | 1.19 kg |
| Pakendi mõõtmed | 178 × 102 × 51 mm |
Küsimused selle toote kohta
Does the 3.5" 341-9629 drive fit a standard SAS backplane without an adapter?
The 3.5 inch form factor matches standard SAS backplanes and the drive uses a native SAS connector, so no adapter is required for a compatible bay.
What is the common mistake when installing this 15000 RPM SAS drive in a server?
Installers often forget to set the SAS address or ID on the backplane before seating the drive, which prevents the controller from recognising the 600GB volume.
How often should the bearings be checked on a 15K RPM SAS drive like the 341-9629?
Enterprise SAS drives use sealed fluid-dynamic bearings rated for continuous operation; no user bearing checks are required during the normal service life.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
