Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive bare unit with circuit board visible

DELL

DELL 341-9629 600GB 15000 RPM SAS 3.5" internal hard drive

SKU CH-S0R4-GV0DE MPN 341-9629

A 600 GB 3.5-inch SAS hard drive spinning at 15,000 RPM for server workloads

  • PackagingBare Drive
  • InterfaceSerial Attached SCSI
  • Capacity600GB
  • RPM15000 RPM
  • Average Latency12Gb/s
  • UsageIdeal for Servers
  • 600GB capacity stores large server workloads
  • 15000 RPM spindle speed cuts data access latency
  • SAS interface delivers 12Gb/s transfer rate
  • 5 inch form factor fits standard server bays
  • New condition ensures full manufacturer reliability

Enterprise 600 GB SAS drive

This Dell 341-9629 is a 3.5 inch internal hard drive with a 600 GB capacity and a 15000 RPM spindle speed. It connects through a SAS interface rated at 12 Gb/s average latency. The unit is supplied as a bare drive in new condition.

Suited for high-throughput server workloads

The 15K rotation speed makes this drive suitable for transactional databases, virtualization hosts and other I/O intensive server roles. It is not intended for desktop PCs or consumer NAS units that lack SAS backplanes or controllers. Buyers who need larger capacities or lower power draw should consider alternative storage types.

15000 RPM spindle speed

The 15000 RPM specification is the primary factor that determines whether this drive meets the performance envelope of the target server application. Verify that the host system supports 3.5 inch SAS drives and provides adequate cooling for 15K operation before purchase.

Kohokohdat

  • 600GB capacity stores large server workloads
  • 15000 RPM spindle speed cuts data access latency
  • SAS interface delivers 12Gb/s transfer rate
  • 5 inch form factor fits standard server bays
  • New condition ensures full manufacturer reliability

Tekniset tiedot

BrandDell
Model341-9629
PackagingBare Drive
InterfaceSerial Attached SCSI
Capacity600GB
RPM15000 RPM
Average Latency12Gb/s
UsageIdeal for Servers
Form Factor3.5"
Lähetyspaino1.19 kg
Pakkauksen mitat178 × 102 × 51 mm

Kysymyksiä tästä tuotteesta

Does the 3.5" 341-9629 drive fit a standard SAS backplane without an adapter?

The 3.5 inch form factor matches standard SAS backplanes and the drive uses a native SAS connector, so no adapter is required for a compatible bay.

What is the common mistake when installing this 15000 RPM SAS drive in a server?

Installers often forget to set the SAS address or ID on the backplane before seating the drive, which prevents the controller from recognising the 600GB volume.

How often should the bearings be checked on a 15K RPM SAS drive like the 341-9629?

Enterprise SAS drives use sealed fluid-dynamic bearings rated for continuous operation; no user bearing checks are required during the normal service life.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.