SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
DELL
6 TB 3.5-inch SAS drive spins at 7200 RPM with a 12 Gb/s interface and hot-swap tray
The Dell 400-ANRV is a 6 TB 3.5 inch Nearline SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface. It is built for Dell PowerEdge servers and compatible storage arrays that accept hot-swap 3.5 inch SAS drives. The bare-drive packaging suits system integrators and IT teams refreshing or expanding existing arrays. Home desktop builders without a SAS backplane or HBA cannot use this drive.
As a 7.2K Nearline SAS drive it draws typical enterprise nearline power and produces the acoustic profile expected of a 7200 RPM 3.5 inch mechanical disk in a server chassis. The hot-swap tray design allows replacement without powering down the enclosure, keeping airflow and thermal balance unchanged during maintenance. No additional cooling or noise-dampening accessories are included or required beyond standard server airflow.
The drive ships in a hot-swap tray so technicians can insert or remove it while the system runs, reducing downtime during drive replacement or capacity upgrades. No mounting screws, cables, adapters or management software are bundled; the tray itself is the only accessory. Firmware updates and monitoring rely on the host server's storage controller and Dell OpenManage tools, which are separate from this bare drive.
| Brand | Dell |
|---|---|
| Model | 400-ANRV |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 6TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Slide the bare drive into the 3.5" hot-swap tray until the SAS connector seats firmly, then lock the lever; the step often missed is verifying the 12 Gb/s link negotiates correctly in the controller BIOS before putting the array into production.
As a 7200 RPM mechanical drive, it will eventually require full replacement once SMART attributes such as reallocated sectors or seek errors exceed threshold; no user-serviceable parts exist inside the sealed helium enclosure.
The 7200 RPM rotational speed caps sequential throughput at the media transfer rate, so sustained writes saturate well before the 12 Gb/s SAS interface becomes the bottleneck.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?