DELL
DELL GY583 400 GB 3.5" 10000 RPM SAS internal hard drive
A 400 GB SAS hard drive spinning at 10000 RPM with a 16 MB buffer in a 3.5 inch form factor
- InterfaceSAS 3Gb/s
- Capacity400GB
- NAND Flash Memory TypeSLC
- RPM10000 RPM
- Form Factor3.5"
- 400 GB capacity meets enterprise storage demands
- 10000 RPM spindle speed accelerates data access
- SAS 3Gb/s interface ensures reliable server connectivity
- 16 MB buffer smooths burst workloads
- 5 inch form factor fits standard drive bays
Capacity and interface
The Dell GY583 is a 400 GB internal hard drive with a 3.5 inch form factor and a SAS 3Gb/s interface. It spins at 10000 RPM and uses SLC NAND flash memory. A 16 MB buffer supports sustained throughput. The unit is sold in refurbished condition.
Who this suits and who should look elsewhere
This drive suits servers or workstations that require a SAS 3Gb/s connection and 10000 RPM spindle speed. Buyers needing a different interface standard, a larger capacity, or a 2.5 inch form factor should consider other options. Systems without a compatible SAS controller cannot use this drive.
Deciding specification
The SAS 3Gb/s interface is the single specification that determines compatibility. The host system must provide a matching SAS port and backplane. Without that interface, the drive will not function regardless of capacity or spindle speed.
Põhijooned
- 400 GB capacity meets enterprise storage demands
- 10000 RPM spindle speed accelerates data access
- SAS 3Gb/s interface ensures reliable server connectivity
- 16 MB buffer smooths burst workloads
- 5 inch form factor fits standard drive bays
Tehnilised andmed
| Brand | Dell |
|---|---|
| Interface | SAS 3Gb/s |
| Capacity | 400GB |
| NAND Flash Memory Type | SLC |
| RPM | 10000 RPM |
| Form Factor | 3.5" |
| Tarnekaal | 0.91 kg |
| Pakendi mõõtmed | 203 × 152 × 51 mm |
Küsimused selle toote kohta
Will this 3.5-inch SAS drive work in a server that only has 3Gb/s SAS backplanes?
Yes, the drive interface standard is 3Gb/s SAS so it will negotiate at that speed on your existing backplane.
How can I verify the drive is running at 10000 RPM after installation?
Check the spindle speed reported in your RAID controller BIOS or SMART data; it should show 10000 RPM.
Does the GY583 come with a mounting tray or cables, or must I source them separately?
The unit is sold as a bare drive; you will need to supply a 3.5-inch tray and SAS data and power cables yourself.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
