Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular 3.5 inch silver metal hard drive with circuit board visible underneath

DELL

DELL GY583 400 GB 3.5" 10000 RPM SAS internal hard drive

SKU CH-YP0K-XEM0M MPN GY583

A 400 GB SAS hard drive spinning at 10000 RPM with a 16 MB buffer in a 3.5 inch form factor

  • InterfaceSAS 3Gb/s
  • Capacity400GB
  • NAND Flash Memory TypeSLC
  • RPM10000 RPM
  • Form Factor3.5"
  • 400 GB capacity meets enterprise storage demands
  • 10000 RPM spindle speed accelerates data access
  • SAS 3Gb/s interface ensures reliable server connectivity
  • 16 MB buffer smooths burst workloads
  • 5 inch form factor fits standard drive bays

Capacity and interface

The Dell GY583 is a 400 GB internal hard drive with a 3.5 inch form factor and a SAS 3Gb/s interface. It spins at 10000 RPM and uses SLC NAND flash memory. A 16 MB buffer supports sustained throughput. The unit is sold in refurbished condition.

Who this suits and who should look elsewhere

This drive suits servers or workstations that require a SAS 3Gb/s connection and 10000 RPM spindle speed. Buyers needing a different interface standard, a larger capacity, or a 2.5 inch form factor should consider other options. Systems without a compatible SAS controller cannot use this drive.

Deciding specification

The SAS 3Gb/s interface is the single specification that determines compatibility. The host system must provide a matching SAS port and backplane. Without that interface, the drive will not function regardless of capacity or spindle speed.

Helstu kostir

  • 400 GB capacity meets enterprise storage demands
  • 10000 RPM spindle speed accelerates data access
  • SAS 3Gb/s interface ensures reliable server connectivity
  • 16 MB buffer smooths burst workloads
  • 5 inch form factor fits standard drive bays

Tæknilýsing

BrandDell
InterfaceSAS 3Gb/s
Capacity400GB
NAND Flash Memory TypeSLC
RPM10000 RPM
Form Factor3.5"
Sendingarþyngd0.91 kg
Stærð sendingar203 × 152 × 51 mm

Spurningar um þessa vöru

Will this 3.5-inch SAS drive work in a server that only has 3Gb/s SAS backplanes?

Yes, the drive interface standard is 3Gb/s SAS so it will negotiate at that speed on your existing backplane.

How can I verify the drive is running at 10000 RPM after installation?

Check the spindle speed reported in your RAID controller BIOS or SMART data; it should show 10000 RPM.

Does the GY583 come with a mounting tray or cables, or must I source them separately?

The unit is sold as a bare drive; you will need to supply a 3.5-inch tray and SAS data and power cables yourself.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.