Enfain
Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable Aqua Blue
Aqua duplex patch cord with LC and SC ceramic ferrules, OM3 10-gigabit core at 850 nm, 3.0 mm jacket, .2 dB typical insertion loss, .3 dB maximum, return loss over 38 dB, 330 mm bend radius.
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB
- High return loss exceeding 38 dB for clean signals
- OM3 core supports 10 Gbps over 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
OM3 LC-SC Duplex Fibre Cable
This Enfain OM3 multimode patch cord uses a 3.0 mm aqua blue jacket with ceramic ferrules and LC to SC connectors. It is built for 1 G, 10 G and 40 G Ethernet links in switches, servers and data-centre racks. The 850 nm wavelength and OM3 core suit short-range backbone runs.
Installers needing LC-to-SC patching
Technicians who need a ready-made LC-to-SC duplex lead for OM3 infrastructure will find this cable a direct fit. Builders who require SC-to-SC, LC-to-LC or single-mode connectors should select a different assembly. The fixed connector pairing limits re-use in panels that demand alternative terminations.
0.3 dB maximum insertion loss
The worst-case insertion loss of 0.3 dB per connector determines whether the link meets the loss budget for 10 G or 40 G operation. Return loss exceeds 38 dB and the cable withstands 1000 mating cycles across an operating range of –20 °C to +60 °C.
Põhijooned
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB
- High return loss exceeding 38 dB for clean signals
- OM3 core supports 10 Gbps over 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
Tehnilised andmed
Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Küsimused selle toote kohta
Which OM3 LC-SC duplex cable length should I choose?
Select the length that reaches between your LC and SC ports with enough slack for routing; all lengths share the same 3.0 mm jacket, 850 nm wavelength and 0.2 dB typical insertion loss.
What does the 10-gigabit core rating mean for actual throughput?
The OM3 10-gigabit core supports 10 GbE, 40 GbE and 100 GbE links at 850 nm; typical insertion loss is 0.2 dB and maximum 0.3 dB, so signal margin stays high in a real link.
What does the LC-SC duplex interface limit in practice?
The duplex LC-SC connectors mate with standard SFP/SFP+ transceivers at 850 nm; return loss exceeds 38 dB and the cable withstands 1000 mating cycles, so the interface caps neither speed nor reliability.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








