Enfain
Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable Aqua Blue
Aqua duplex patch cord with LC and SC ceramic ferrules, OM3 10-gigabit core at 850 nm, 3.0 mm jacket, .2 dB typical insertion loss, .3 dB maximum, return loss over 38 dB, 330 mm bend radius.
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB
- High return loss exceeding 38 dB for clean signals
- OM3 core supports 10 Gbps over 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
OM3 LC-SC Duplex Fibre Cable
This Enfain OM3 multimode patch cord uses a 3.0 mm aqua blue jacket with ceramic ferrules and LC to SC connectors. It is built for 1 G, 10 G and 40 G Ethernet links in switches, servers and data-centre racks. The 850 nm wavelength and OM3 core suit short-range backbone runs.
Installers needing LC-to-SC patching
Technicians who need a ready-made LC-to-SC duplex lead for OM3 infrastructure will find this cable a direct fit. Builders who require SC-to-SC, LC-to-LC or single-mode connectors should select a different assembly. The fixed connector pairing limits re-use in panels that demand alternative terminations.
0.3 dB maximum insertion loss
The worst-case insertion loss of 0.3 dB per connector determines whether the link meets the loss budget for 10 G or 40 G operation. Return loss exceeds 38 dB and the cable withstands 1000 mating cycles across an operating range of –20 °C to +60 °C.
주요 특징
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB
- High return loss exceeding 38 dB for clean signals
- OM3 core supports 10 Gbps over 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Which OM3 LC-SC duplex cable length should I choose?
Select the length that reaches between your LC and SC ports with enough slack for routing; all lengths share the same 3.0 mm jacket, 850 nm wavelength and 0.2 dB typical insertion loss.
What does the 10-gigabit core rating mean for actual throughput?
The OM3 10-gigabit core supports 10 GbE, 40 GbE and 100 GbE links at 850 nm; typical insertion loss is 0.2 dB and maximum 0.3 dB, so signal margin stays high in a real link.
What does the LC-SC duplex interface limit in practice?
The duplex LC-SC connectors mate with standard SFP/SFP+ transceivers at 850 nm; return loss exceeds 38 dB and the cable withstands 1000 mating cycles, so the interface caps neither speed nor reliability.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








