Enfain
Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 20m Aqua Blue
A 20-metre OM3 duplex patch cable with LC and FC connectors for 10-gigabit multimode links at 850 nm
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
- High return loss exceeding 38 dB for clean signal reflection
- Supports 10 Gbps multimode transmission at 850 nm wavelength
- Durable ceramic ferrules rated for 1000 insertion cycles
- Flexible 3.0 mm PVC jacket with 330 mm bending radius
Enfain OM3 LC-FC Duplex 20m Cable
This Enfain OM3 LC-FC duplex multimode fibre optic cable is built for high-speed data links in switches, servers and data centres. It uses a 10-gigabit core with ceramic ferrules and a 3.0 mm PVC jacket in aqua blue for easy identification. The 20 metre length suits rack-to-rack or cross-room connections.
Ideal for 10G multimode links, not for single-mode
The cable suits installers who need a ready-made duplex patch cord for 1G, 10G or 40G multimode networks running at 850 nm. It works within an operating range of -20 °C to +60 °C and tolerates a 330 mm bending radius. Buyers who need single-mode fibre, longer reach or a different connector pairing should look at other options.
10G OM3 core with .2 dB typical loss
The OM3 10-gigabit multimode core delivers a typical insertion loss of .2 dB and a maximum of .3 dB, with return loss better than 38 dB. These figures confirm the cable meets the performance window for short-range 10G Ethernet and compatible 40G parallel optics. The ceramic ferrules are rated for 1000 mating cycles.
주요 특징
- Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
- High return loss exceeding 38 dB for clean signal reflection
- Supports 10 Gbps multimode transmission at 850 nm wavelength
- Durable ceramic ferrules rated for 1000 insertion cycles
- Flexible 3.0 mm PVC jacket with 330 mm bending radius
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
What patch-panel spacing does the 330 mm minimum bend radius require for this 20 m OM3 LC-FC duplex cable?
Allow at least 330 mm of clearance behind the panel so the 3.0 mm jacket never bends tighter than the specified radius.
Which connector end should be seated first when installing this LC-FC duplex patch cord to avoid ferrule damage?
Insert the LC connector until it clicks, then mate the FC end by aligning the key and turning the nut finger-tight.
After how many mating cycles should the ceramic ferrules on this OM3 duplex cable be inspected or replaced?
The ferrules are rated for 1000 insertion and removal cycles; plan inspection or replacement once that count is approached.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








